freeride wheels wanted
i was wondering......
does anyone have any:
retro freerides
otang stimulus
harder gumballs
or something like that that wouldanything that would make learning to slide any easier
if theyre lying aorund your room/car/house feeling unloved......
thanks heaps
does anyone have any:
retro freerides
otang stimulus
harder gumballs
or something like that that wouldanything that would make learning to slide any easier
if theyre lying aorund your room/car/house feeling unloved......
thanks heaps
Tags: abec, freeride, otang, retro, slide, stimulus
Views: 38
Replies to This Discussion
-
Permalink Reply by stephen.mhsrider on
-
you could try radius the lips of your gumballs to make them slide smoother.
-
Permalink Reply by Joe on
-
Trust me most people will cone there freeride wheels down to cores before they think about selling them because there so much fun haha, but ya never know!
-
Premium MemberPermalink Reply by Toby on -
i dont have any, i just had a look and saw that they start at 78a
stephen.mhsrider said:you could try radius the lips of your gumballs to make them slide smoother.
-
Permalink Reply by Dan Mactaggart on
-
buy durians, there insane
-
-
what wheels are you running right now?
-
Premium MemberPermalink Reply by Toby on -
i got some bigzigs and am sick of having chattery slides and gettin flicked over the top just trying to learn a coleman
stephen.mhsrider said:what wheels are you running right now?
-
Permalink Reply by Kanufi on
-
You can make your own wheels for sliding.1st have your choosen wheel attached to trucks and ready to roll. Then get a piece of timber about yey long and nail some 50grade sandpaper to the timber. Find a quiet street and start cruis,n down the road with the timber and start sanding away your wheels edges until round. Be carefull not to run over your mobile lathe that's not good.
-
Premium MemberPermalink Reply by pete hill on -
ha, cant wait for the stories and photos to start rolling in from the groms about the consequence's of this method, it will be amusing, you can make rain wheels using the same method, try it.
-
Premium MemberPermalink Reply by Toby on -
i kinda do but really dont wanna try that,
Kanufi said:You can make your own wheels for sliding.1st have your choosen wheel attached to trucks and ready to roll. Then get a piece of timber about yey long and nail some 50grade sandpaper to the timber. Find a quiet street and start cruis,n down the road with the timber and start sanding away your wheels edges until round. Be carefull not to run over your mobile lathe that's not good.
-
-
i've done it before, more effective if you use a file. And it helps to go faster or else it will be VEEEERY tedious
-
-
Yeah it's high on the dodgy scale. Groms get your dad to have a go 1st tell him after we have done the wheels we can swap the sandpaper onto the wheels and he can start sanding wood and shit. So many practical uses .
-
Permalink Reply by Andrew G on
-
are you running spacers, cause i learn to pendy on bigzigs and once the lip was gone they never chattered and ensure the wheel nut is locked down because u dont want play in the wheel.
Toby said:i got some bigzigs and am sick of having chattery slides and gettin flicked over the top just trying to learn a coleman
stephen.mhsrider said:what wheels are you running right now?
© 2025 Created by Bugs.
Powered by
