ASRA - Australian Skateboard Racing Association


Premium Member

slide pucks

after mums cutting board whats the best plastic for pucks??
and does anyone have any i can buy??
thanks

Views: 75

▶ Reply to This

Replies to This Discussion


Premium MemberPermalink Reply by sean meaney on October 10, 2009 at 23:57
get some corian samples and add valcro, its slippery as all hell but is kinda loud
Permalink Reply by Joe on October 11, 2009 at 0:48
UHMW (Ultra-High Molecular Weight)
Permalink Reply by Brad NS on October 11, 2009 at 1:29
ive been using some "Mother Puckers " From PC they are a very nice puck good size ,shape and hardness !!

ill find out a price !! and post here !!
Permalink Reply by Robbo on October 11, 2009 at 7:31
Acetel or its propriety name Delrin is the best stuff. Landyachtz uses UHMW which is a type of Polypropylene and may be slightly cheaper. You buy this stuff from Plastix.

Acetal provides high strength and stiffness, enhanced dimensional stability and is easy to machine. It is characterized by a low coefficient of friction , good wear properties and chemical resistance.

UHMWPE is lightweight, has high tensile strength, is easily machinable, self lubricating, shatter resistant, long wearing, abrasion & corrosion resistant.
Permalink Reply by Hamish on October 11, 2009 at 7:51
80mm by 80mm by 15mm thick with velcro.
2pieces= $20
100mm by 100mm by 10mm thick with Velcro.
2pieces=$20
Polyproperlean let me know if any one is interested.
0408873374
Permalink Reply by Isaac Naumann on October 11, 2009 at 7:52
those pieces are massive. they are both square. how do they fit on a glove.

Hamish said:
80mm by 80mm by 15mm thick with velcro.
2pieces= $20 100mm by 100mm by 10mm thick with Velcro. 2pieces=$20
Polyproperlean let me know if any one is interested.
0408873374
Permalink Reply by Robbo on October 11, 2009 at 8:02
He gives you the square and you cut it yourself
Permalink Reply by Isaac Naumann on October 11, 2009 at 8:11
ok.

Robbo said:
He gives you the square and you cut it yourself

Premium MemberPermalink Reply by Toby on October 11, 2009 at 8:20
do you have any left over i can but off you????

Merrick Wildash said:
I think its called UHFMW or something along those lines.

Or

Go to your local plastics shop, Buy a roll of plastic 7cm in diameter, ask them to sut it into 3cm slices, and your away.
Hardest compound avaliable.

(thats what i did, just need to make the gloves :S)
Permalink Reply by Hamish on October 11, 2009 at 8:48
I've been using the 100 by 100 and they are great.
From base of palm all the way to start of fingers.
@ 15mm thick I think it's less likely you will get wear on finger tips.
Dosent interfear with grabing rail at all
You need to get the fuzzy Velcro stiched into palm of glove I can supply that to if need be.
I'll be bringing some to Bathurst .
Again if interested 0408873374:)
Permalink Reply by Gilbert on October 11, 2009 at 13:02
I just tested out your pucks yesterday hamish and they slide silky smooth, and aren't loud either. I think fendy will be getting some off you, he liked them as well.

Hamish said:
I've been using the 100 by 100 and they are great.
From base of palm all the way to start of fingers.
@ 15mm thick I think it's less likely you will get wear on finger tips.
Dosent interfear with grabing rail at all
You need to get the fuzzy Velcro stiched into palm of glove I can supply that to if need be.
I'll be bringing some to Bathurst .
Again if interested 0408873374:)

Premium MemberPermalink Reply by Ian Coggan on April 4, 2010 at 15:58
Hey does anyone have any good pucks to buy?
my chopping board sorta dissolved a bit quicker then expected.
thick?

▶ Reply to Discussion

RSS

Search

© 2025   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service