trucks
i need a stable downhill truck preferably cast for my glyde dilligaf, i like stealth and sabre trucks but i just wanted some help.
thanks
thanks
Views: 86
Replies to This Discussion
-
Premium MemberPermalink Reply by Robert-Da-Bomb on -
Sabre is the best cast you can buy
-
Premium MemberPermalink Reply by Ian Coggan on -
crails
-
Permalink Reply by Michael English on
-
randal 42 degrees are the raddest cast trucks i have ever seen on a diligaf!!!
-
Premium MemberPermalink Reply by Kelly Carter on -
Crails look the best but randals seem the best option
-
Premium MemberPermalink Reply by DA BEAR on -
I run sabres on my dilligaf, rode it at the Pump Station round of CCH,
just be aware that sabres turn deep and you may have to redrill the deck/lenghten the wheelbase,
to avoid bite on 75mm wheels.
-
Premium MemberPermalink Reply by Matthys on -
randal 42s are sick on a dilly!!
calibers would be better...
-
Premium MemberPermalink Reply by Tom Radinski on -
i dont have a great deal of experience but i dont like randals at all for so many reasons. Mate has sabres and they look like they would be a great truck but seem to have wheel bite issues with alot of setups. Personaly i really like the bear trucks with JimZ bushings, only ridden the 52 degree but the 40something degree ones would be great for higher speeds.
-
Premium MemberPermalink Reply by sean meaney on -
gunmetals are dope as hell mate, i would definently be checking them out
-
Premium MemberPermalink Reply by Lewis Carroll on -
hey man would i get bite if my trucks were pretty tight and are sabres low
DA BEAR said:I run sabres on my dilligaf, rode it at the Pump Station round of CCH,
just be aware that sabres turn deep and you may have to redrill the deck/lenghten the wheelbase,
to avoid bite on 75mm wheels.
-
Premium MemberPermalink Reply by Lewis Carroll on -
what is the lowest cast truck
-
Premium MemberPermalink Reply by Lewis Carroll on -
any advice\opinions on stealth
-
Premium MemberPermalink Reply by DA BEAR on -
Ride height of 45deg sabres is,
app the same as a 50deg randal,
app 8mm higher than a 42deg randall,
also the randall's are app 177mm hanger, sabres app 192mm hanger,
heres something i posted previously,
As a comparison,
Randalls axel is app 30mm forward of the rear bolt holes,
Sabre's axel is app 7mm forward of the rear bolt holes.
So if you mount the sabres in the same bolt holes as randalls
your wheelbase will be app 46mm shorter add that to their gangster lean and it bites bad.
Nose/Tail lengths may need to be thought about a bit more if you intend running Sabres.
I had to redrill the DILLIGAF today./i>br />
Lewis Carroll said:hey man would i get bite if my trucks were pretty tight and are sabres low
DA BEAR said:I run sabres on my dilligaf, rode it at the Pump Station round of CCH,
just be aware that sabres turn deep and you may have to redrill the deck/lenghten the wheelbase,
to avoid bite on 75mm wheels.
© 2024 Created by Bugs.
Powered by
