hardware and bushings
so everyone says upgrade your bushings so i bouught some green and yellow cone venoms supercarves a while ago.. i just tried to put them on my dervish (randal 180's) and they dont fit with the standard kingpin. i was gonna buy new kingpins from boardshop but they only have randal replacement kingpins which i assume will be the same size. so do either hopshop or cr8ive skate stock longer kingpins. or is the randal kingpin longer than the normall one.
also i weigh 65kg and if there are any really good bushing setups you would recommend for a dervish ill get those aswell i guess.
thanks.
also i weigh 65kg and if there are any really good bushing setups you would recommend for a dervish ill get those aswell i guess.
thanks.
Views: 73
Replies to This Discussion
-
Permalink Reply by Nick Scott on
-
k why is my kingbpin like inside my bushing
Olly Smith said:Barrels
nick Scott said:k what type like downhill or supercarve
-
Permalink Reply by Olly Smith on
-
From memory you dont have any washers
-
-
oooh yeh i remember i was loosening trucks but loosend them so much this little metal thing fell out
Olly Smith said:From memory you dont have any washers
-
-
Ask your brother about these things........
-
Permalink Reply by Isaac Naumann on
-
nick you kingpin goes through your bushings. FACEPALM!!!!!!!!!!!!!!!!!!!.
do you honestly think that the bushings magically sit there without something holding them there while you are skating
Olly Smith said:Ask your brother about these things........
-
-
isnt the kingpin the thing u put ur skate tool around when u tighten it
-
-
no thats the kingpin nut. ok. well if its that. i thought you meant the actual kingpin, and i was like. well. wtf do you think holds the bushing on.
lol
nick Scott said:isnt the kingpin the thing u put ur skate tool around when u tighten it
- ‹ Previous
- 1
- 2
- Next ›
© 2024 Created by Bugs.
Powered by
