LOOKING FOR USED TRUCKS WHEELS AND BEARING

Pick up or delivered dont mind

Replies to This Discussion

Premium MemberPermalink Reply by sean meaney on August 15, 2010 at 17:33

was on boardshop.com.au and saw these, http://www.boardshop.com.au/servlet/the-3973/GULLWING-CHARGER-9-INC... dirt cheap, brand new and come with fairly good stock bushings

Premium MemberPermalink Reply by sean meaney on August 15, 2010 at 17:34

and for wheels look at some satori big buds, they are about 50 a set and ride fairly well

Premium MemberPermalink Reply by DA BEAR on August 15, 2010 at 18:17

Pair of R-II's (one with spherical in pivot) fair cond $50
Otang In heat 75mm 80A good cond $60,
set of bearings free, I have to find them in the shed.
Pick up in CBD.

Premium MemberPermalink Reply by Matthys on August 15, 2010 at 18:18

add me, and well discuss it........

Permalink Reply by steve hardy on August 15, 2010 at 18:28

yea but voodoo are new trucks im not looking to spend a fortune I'm just starting out

Premium MemberPermalink Reply by DA BEAR on August 16, 2010 at 17:32

Are you interested?

DA BEAR said:

Pair of R-II's (one with spherical in pivot) fair cond $50
Otang In heat 75mm 80A good cond $60,
set of bearings free, I have to find them in the shed.
Pick up in CBD.

Premium MemberPermalink Reply by Matthys on August 16, 2010 at 17:36

i think he just bought my parises with zigs

Permalink Reply by steve hardy on August 16, 2010 at 18:15

yea i did ill give you the money tonight can you please ship it the next day if possible

Matthys van lille said:

i think he just bought my parises with zigs

Premium MemberPermalink Reply by Jack on August 16, 2010 at 19:34

out of interest, how did you get a spherical in randals, im a bit confused about the whole spherical thing, i thought they were for precisions or something

DA BEAR said:

Are you interested?

DA BEAR said:
Pair of R-II's (one with spherical in pivot) fair cond $50
Otang In heat 75mm 80A good cond $60,
set of bearings free, I have to find them in the shed.
Pick up in CBD.

Permalink Reply by Jezza on August 16, 2010 at 20:27

take out regular pivot, mill baseplate to fit spherical, replace pivot on hanger with suitable join, insert spherical, insert join.

bit more complex than that but yeah.....

$50 for randals is good fullstop, but modded it's a great buy

oh and their used in precisions to give that....well precision feel. They reduce pivot play, allow the hanger to work at any angle to the pivot (only impacting on the bushing) and reduce resistance that you normally get with a urethane/delrin pivot
Jack Nolan said:

out of interest, how did you get a spherical in randals, im a bit confused about the whole spherical thing, i thought they were for precisions or something

DA BEAR said:
Are you interested?

DA BEAR said:
Pair of R-II's (one with spherical in pivot) fair cond $50
Otang In heat 75mm 80A good cond $60,
set of bearings free, I have to find them in the shed.
Pick up in CBD.

Permalink Reply by steve hardy on August 16, 2010 at 20:33

meh i like the paris 180's

Jezza said:

take out regular pivot, mill baseplate to fit spherical, replace pivot on hanger with suitable join, insert spherical, insert join.

bit more complex than that but yeah.....

$50 for randals is good fullstop, but modded it's a great buy

oh and their used in precisions to give that....well precision feel. They reduce pivot play, allow the hanger to work at any angle to the pivot (only impacting on the bushing) and reduce resistance that you normally get with a urethane/delrin pivot
Jack Nolan said:
out of interest, how did you get a spherical in randals, im a bit confused about the whole spherical thing, i thought they were for precisions or something

DA BEAR said:
Are you interested?

DA BEAR said:
Pair of R-II's (one with spherical in pivot) fair cond $50
Otang In heat 75mm 80A good cond $60,
set of bearings free, I have to find them in the shed.
Pick up in CBD.

LOOKING FOR USED TRUCKS WHEELS AND BEARING

Replies to This Discussion

Search