Drop-Through Killswitch.

Ok here we go.

In about two weeks i am going to be lucky enough to be revieving a drop-through killswitch deck for my b'day and by the end of the year i should have enough money to splash out on a set of precision's and i have had my eye on a set of munkaes for a while now, but i though the ride hight would be quite low and there may be a possibilty of railbite?! anyways basically i'm posting this to ask what set of precisions would best suit the board! i've aslo looking into a set of Aera's but oh well we'll see. :)

Make a comment and tell me what you think. :)

Tags: Aera's, Killswitch, Munkaes

Attachments:

killswitch.jpg, 11 KB
munkae.png, 104 KB

▶ Reply to This

Replies to This Discussion

Premium MemberPermalink Reply by Matthys on October 13, 2010 at 19:45

aeras make this debatable.....
however, 42 randals are the shiz for shredding and grinding curbs

sean meaney said:

rupert, you are wasting your money i am going to be completely honest, your not even close to a level where you should have a look at buying CNC trucks....... other then maybe SZ or Cindys, you will not be able to enjoy a CNC truck like Munkaes or a race truck like that if most of your riding is royal park, fitzy gardens and carparks, get some good cast trucks and when you start racing interstate or OS look at a set of CNC trucks, plenty of guys shred cast trucks and if your that serious about DH you can spend your money on things you need like a quality helmet and a good set of leathers

▶ Reply

Premium MemberPermalink Reply by sean meaney on October 13, 2010 at 20:05

this is from experience with the guy, trust me cast trucks are all he needs, especially in melb

Matthys said:

aeras make this debatable.....
however, 42 randals are the shiz for shredding and grinding curbs

sean meaney said:
rupert, you are wasting your money i am going to be completely honest, your not even close to a level where you should have a look at buying CNC trucks....... other then maybe SZ or Cindys, you will not be able to enjoy a CNC truck like Munkaes or a race truck like that if most of your riding is royal park, fitzy gardens and carparks, get some good cast trucks and when you start racing interstate or OS look at a set of CNC trucks, plenty of guys shred cast trucks and if your that serious about DH you can spend your money on things you need like a quality helmet and a good set of leathers

▶ Reply

Permalink Reply by Laurence Lombardi on October 13, 2010 at 20:40

i ride 200mm Kooky's and with green barrel venoms, its great!
ride smooth and heaps stable, i was riding it dropthru and i found it really low, so i made it a top mount and works much better, but as people say its all personal prefference

Drop-Through Killswitch.

Replies to This Discussion

Search