ASRA - Australian Skateboard Racing Association

are there any specific nose guards for the apex 37?

I own an apex 37 and i tend to run into gutters sometimes, is there a specific nose guard for it or will i have to get it specialy made? (pictures are attached if you arnt sure of the board)

Tags: 37, apex, guard, guards, longboard, nose, protect

Views: 767

Attachments:

Reply to This

Replies to This Discussion

buy a cheap mouth guard preferably a thick one, heat it up in boiling water till its almost fully melted, get it out and let it cool down for about 30 seconds and then mold it onto the nose. works a treat for me, although it looks a little funny but still workes great nun the less
ok thanks ill give it a go !

Riley Brennan said:
buy a cheap mouth guard preferably a thick one, heat it up in boiling water till its almost fully melted, get it out and let it cool down for about 30 seconds and then mold it onto the nose. works a treat for me, although it looks a little funny but still workes great nun the less
make sure you mold it around the lip so it fits aswell.
Ask Col in the home grown section - custom nose guards :) I suggest the aluminium one if you do get them - they're not as strong as steel but they are soooo light :)
ok ill check it out, thanks for the replies, much appriciated

Cents said:
Ask Col in the home grown section - custom nose guards :) I suggest the aluminium one if you do get them - they're not as strong as steel but they are soooo light :)
are there any that are made by bombsquad or someone that are specificaly for apex 37 though?

bomb squad have a "skeleton key" nose guard to fit random boards. Its built for drop through boards though so i wouldn't be to sure. I've heard of using layers of electrical tape to cover the nose and tail but don't cover the top of the board or manuals could get sketchy. My apex 37 is delamed and I've cracked the nose, so if you want it to last, I'd deffinately try out something. The electrical tape would probably be more stealthy then the mouth guard but id guess the mouth guard would be stronger. Another way to make a nose guard is to get a stick of glue (as in the ones you put in a hot glue gun) cut it in half down the middle so its a half cylinder, warm up the flat side so it gets squishy and then stick it to the nose. repeat for the tail since you have two pieces. Thats the only idea's I've seen done but the mouth guard sounds like a good idea. The choice is yours lol

 

oh ditch the janky trucks as well, get some paris/randalls/bears, no wonder you've been running into gutters. I personally run paris's. Much more stable and a much better feel.

thanks !! much appricitated, and yeah i have some blue paris trucks but i acctuly (now im used to them) and likeing the S8's with the prings set up, i find it heaps good :)

Frankie Michael said:

bomb squad have a "skeleton key" nose guard to fit random boards. Its built for drop through boards though so i wouldn't be to sure. I've heard of using layers of electrical tape to cover the nose and tail but don't cover the top of the board or manuals could get sketchy. My apex 37 is delamed and I've cracked the nose, so if you want it to last, I'd deffinately try out something. The electrical tape would probably be more stealthy then the mouth guard but id guess the mouth guard would be stronger. Another way to make a nose guard is to get a stick of glue (as in the ones you put in a hot glue gun) cut it in half down the middle so its a half cylinder, warm up the flat side so it gets squishy and then stick it to the nose. repeat for the tail since you have two pieces. Thats the only idea's I've seen done but the mouth guard sounds like a good idea. The choice is yours lol

 

oh ditch the janky trucks as well, get some paris/randalls/bears, no wonder you've been running into gutters. I personally run paris's. Much more stable and a much better feel.

Springs*

Tayla Harris said:
thanks !! much appricitated, and yeah i have some blue paris trucks but i acctuly (now im used to them) and likeing the S8's with the prings set up, i find it heaps good :)

Frankie Michael said:

bomb squad have a "skeleton key" nose guard to fit random boards. Its built for drop through boards though so i wouldn't be to sure. I've heard of using layers of electrical tape to cover the nose and tail but don't cover the top of the board or manuals could get sketchy. My apex 37 is delamed and I've cracked the nose, so if you want it to last, I'd deffinately try out something. The electrical tape would probably be more stealthy then the mouth guard but id guess the mouth guard would be stronger. Another way to make a nose guard is to get a stick of glue (as in the ones you put in a hot glue gun) cut it in half down the middle so its a half cylinder, warm up the flat side so it gets squishy and then stick it to the nose. repeat for the tail since you have two pieces. Thats the only idea's I've seen done but the mouth guard sounds like a good idea. The choice is yours lol

 

oh ditch the janky trucks as well, get some paris/randalls/bears, no wonder you've been running into gutters. I personally run paris's. Much more stable and a much better feel.

Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service