ASRA - Australian Skateboard Racing Association

RAYNE ISIS, LANDY DROP CARVE, '09 SMOKIES, ETC IN STOCK NOW

Yep, we've got heaps of stock of all sorts of gear at the moment.

Rayne

Isis
Killswitch
Hellcat
Demonseed
Nemesis
Deelites (09 models)

Landy

Drop Carve
Evo
DH Race
Grom Race
Chinook
Switch
Dually
Carbon Evo and Drop Speed
Slide Gloves
Zombies

Bear

'09 Smokies in all baseplate angles
'08 Smokies ask for a deal
10mm bearings

Rogers Bros

Luge in short and long
DH 36
DH 40
3-Piece

Dreggs

New Soy race wheels LUV YO MUTHA in 66, 70 and 76mm

Let me know if there is anything you need. Chances are we have it!!!!

Views: 920

▶ Reply to This

Replies to This Discussion

Permalink Reply by Adrian Alderson on February 26, 2010 at 21:22
$350 gripped shipped and a set of reds

harry hoffmann said:
hmmm i think about it, and how much for a rayne killswitch gripped with bones reds bearings?

Adrian Alderson said:
$550 gripped and shipped to your door

harry hoffmann said:
how much for the dee lite demonseed then? gripped?

Adrian Alderson said:
Sorry, don't have a Nemmi, just a Demonseed and a Hellcat left both drilled for standard trucks.

harry hoffmann said:
suupp, im intrested in a dee-lite nemesis :) how much for it
Permalink Reply by jamie angel on March 20, 2010 at 17:38
what model wefunk is that . i was talking to alex earlier this week. hes in china or something setting up a light weight board facility. i just ordered when he gets the time a speed bne. he thinks it may be some time tho.
Permalink Reply by jamie angel on March 20, 2010 at 17:41
i know a left field question. but can u get kookys, 200mm preferably.
Permalink Reply by Adrian Alderson on March 20, 2010 at 17:58
You have to get them from Kooky himself. He's here on ASRA somewhere, but I haven't seen him for a while.

jamie angel said:
i know a left field question. but can u get kookys, 200mm preferably.
Permalink Reply by Adrian Alderson on March 20, 2010 at 18:02
Yea, we were chatting recently and he has to get the composites factory set up before he can afford to spend time on boards, I guess even geniusses (or should that be genii?) need to eat too. He has some really interesting ideas for new boards and layups. He bought a freezer full of prepreg that will be cool to see the outcome of.

Not sure which Wefunk you are referring to, but the Speedbone is an awesome board, you'll love it, but you'll cry if you slam it into a curb!!!!!!!!!

jamie angel said:
what model wefunk is that . i was talking to alex earlier this week. hes in china or something setting up a light weight board facility. i just ordered when he gets the time a speed bne. he thinks it may be some time tho.
Permalink Reply by jamie angel on March 20, 2010 at 18:09
i was referring to thi wefunk in the board pic earlier in this thread. thats a speedbone there. i think. he promices me it will the most stable and manouverable i ever skate. haha followed up by or maybe not. love sales humour. naa hes on to something special with that composit setup me thinx.


Adrian Alderson said:
Yea, we were chatting recently and he has to get the composites factory set up before he can afford to spend time on boards, I guess even geniusses (or should that be genii?) need to eat too. He has some really interesting ideas for new boards and layups. He bought a freezer full of prepreg that will be cool to see the outcome of.

Not sure which Wefunk you are referring to, but the Speedbone is an awesome board, you'll love it, but you'll cry if you slam it into a curb!!!!!!!!!

jamie angel said:
what model wefunk is that . i was talking to alex earlier this week. hes in china or something setting up a light weight board facility. i just ordered when he gets the time a speed bne. he thinks it may be some time tho.
Permalink Reply by Geoffrey Templer on March 20, 2010 at 21:00
hey ado, im thrashin arpund with that 09 drop speed you sold me a while back and was wonderin if u got any nose and tail gaurds for it you can sell? :)
cheerrs
Permalink Reply by Adrian Alderson on March 20, 2010 at 21:10
Sorry mate, I haven't found anything yet that is worthwhile. In the past I have used conveyor belt rubber attaced through the deck bolts as a loop over the front with a gap between the rubber and the deck to act as a shock absorber. Worked pretty well.

Geoffrey Templer said:
hey ado, im thrashin arpund with that 09 drop speed you sold me a while back and was wonderin if u got any nose and tail gaurds for it you can sell? :)
cheerrs
Permalink Reply by Geoffrey Templer on March 20, 2010 at 21:11
alright, cos its starting to chip away and i gotta find somethin to keep it good :D

Premium MemberPermalink Reply by sean meaney on March 20, 2010 at 21:13
you could try a bomb squad one for a dervish, simiar shape nice big bulky metal sucker which will do its job

Geoffrey Templer said:
alright, cos its starting to chip away and i gotta find somethin to keep it good :D
Permalink Reply by Isaac Naumann on March 21, 2010 at 8:16
they already make a drop speed nose guard anyway.

go to the bombsquad website or motion longboards, and order one direct from there

sean meaney said:
you could try a bomb squad one for a dervish, simiar shape nice big bulky metal sucker which will do its job

Geoffrey Templer said:
alright, cos its starting to chip away and i gotta find somethin to keep it good :D
Permalink Reply by harry hoffmann on March 22, 2010 at 13:38
hey ado, what precision trucks u got? im interested in some,

▶ Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service