problem with hustler.
hey guys.
on my hustler my graphic (the white with the piercings) the back kick of it is lifting up 1-2mm.
is there anything i should do or not do?
thanks ian
on my hustler my graphic (the white with the piercings) the back kick of it is lifting up 1-2mm.
is there anything i should do or not do?
thanks ian
Views: 6
Replies to This Discussion
-
Permalink Reply by stephen.mhsrider on
-
are you talking about the fibreglass on the top of the deck delamming? because the hustler is supposed have a tiny bit of kick on the end
-
Premium MemberPermalink Reply by Ian Coggan on -
nah stephen like the bottom of the board. i know it has sorta kick. but its the white painted fibre glass is starting to peel away from the bamboo.
-
Premium MemberPermalink Reply by Steve on -
Get some araldite or other epoxy glue, pry the layers apart as much as you can. Squirt the glue in. Clamp
-
-
steve has it right, that happens to my friends hustler and it doesnt affect the ride at all and he abuses it HEAPS. but it is still best to epoxy and clamp it up for for ease of mind and so it doesnt get worse
-
Premium MemberPermalink Reply by Jacko on -
probs just chippen away from where you might have scraped the tail from manuals or even just resting the board on its tail and standing it up like that
© 2025 Created by Bugs.
Powered by
