Griptape Glue
Having a bit of trouble with early grippa un-peeling in akward places on my boards
Gas pedals of 9two5
W-cave and c-block on 120 Y
Nose/Tail kicks on platypus
Just wondering if their was some glue out there that i could bond them together, i know it will make it virtually impossible to remove them from the board, but if anyone has any idea let me know, ive already tried one for IGA and it was hopless, im probably just gripping the boards like a idiot but anyway :)
Advice!
Views: 118
Replies to This Discussion
-
Premium MemberPermalink Reply by Fitz on -
It makes a huge difference maintaining a clean surface before you apply grip tape. If there's any residue on the deck face like dust moisture, chemical etc, it will contaminate the glue. Once the glues lost its tackyness the griptapes not worth keeping.
Cut the guilty area out across the full width of the deck. Re-apply a new piece after you have thoroughly cleaned that area.
Last resort, staple it down!
-
Permalink Reply by Harry ONeill on
-
i think ill have to take the last resort :/
No money for grip, priority goes
Wheels, entechis then maybe grip if i cant figure out a way to glue it
Thanks though
-
Permalink Reply by Merrick Wildash on
-
Harry, any glue you can think of will hold it down (well maybe not a gluestick), just depends how much effort you want to put into peeling it off after.
I've glues on grip with household SupaGlue. Worked well, lasted, easy to get off.
Also done it with shoe goo. Little harder to clean up after.
-
-
How long do you recon id need to hold the tape on the board after glueing if i used regulur super glue
thanks
Merrick Wildash said:Harry, any glue you can think of will hold it down, just depends how much effort you want to put into peeling it off after.
I've glues on grip with household SupaGlue. Worked well, lasted, easy to get off.
Also done it with shoe goo. Little harder to clean up after.
-
-
Put a few kg's on it for about 3-5mins Supaglue dries WAAAYY quick.
Harry ONeill said:
How long do you recon id need to hold the tape on the board after glueing if i used regulur super glue
thanks
-
-
Thanks mate
Merrick Wildash said:
Put a few kg's on it for about 3-5mins Supaglue dries WAAAYY quick.
Harry ONeill said:
How long do you recon id need to hold the tape on the board after glueing if i used regulur super glue
thanks
-
Permalink Reply by Philip and Hugh on
-
use contact cement
-
Permalink Reply by Boomhauer on
-
Mix 10 litres of two part epoxy and dump it all over your board. Make sure to get plenty in the bearings. Let it dry in the sun for 2 weeks...she'll be good as new!
-
-
Mix 10 litres of two part epoxy and drink it, then get back to me, youll be good as new!
Boomhauer said:
Mix 10 litres of two part epoxy and dump it all over your board. Make sure to get plenty in the bearings. Let it dry in the sun for 2 weeks...she'll be good as new!
-
-
HAhaha!
Harry ONeill said:
Mix 10 litres of two part epoxy and drink it, then get back to me, youll be good as new!
-
Premium MemberPermalink Reply by tommy on -
boom! haha
Harry ONeill said:
Mix 10 litres of two part epoxy and drink it, then get back to me, youll be good as new!
Boomhauer said:
Mix 10 litres of two part epoxy and dump it all over your board. Make sure to get plenty in the bearings. Let it dry in the sun for 2 weeks...she'll be good as new!
-
Permalink Reply by Cody Herbert on
-
Same thing happened to me on the slide rails of my Ibach but I think its because of the awkward shape. People say most grip will do that. Early Grippa is mad though
© 2024 Created by Bugs.
Powered by
