RAYNE ISIS, LANDY DROP CARVE, '09 SMOKIES, ETC IN STOCK NOW
Rayne
Isis
Killswitch
Hellcat
Demonseed
Nemesis
Deelites (09 models)
Landy
Drop Carve
Evo
DH Race
Grom Race
Chinook
Switch
Dually
Carbon Evo and Drop Speed
Slide Gloves
Zombies
Bear
'09 Smokies in all baseplate angles
'08 Smokies ask for a deal
10mm bearings
Rogers Bros
Luge in short and long
DH 36
DH 40
3-Piece
Dreggs
New Soy race wheels LUV YO MUTHA in 66, 70 and 76mm
Let me know if there is anything you need. Chances are we have it!!!!
Views: 920
Replies to This Discussion
-
Premium MemberPermalink Reply by Conrad To on -
how much is a roger bros DH 36?
-
Premium MemberPermalink Reply by Caspian Baska on -
How much would randal 180s with 42* baseplates and 83a 4 presidents set me back?
-
Permalink Reply by mack daddies daddie on
-
bears bro the ones u can flip fron 52 to 42 ....do u need special bearings for them ...i was told the axles is bigger ....money is not really an issue but i can get a truck wheel deal (randal n otangs n bearings for 150) but really keen on bears let me know what you can do cheers blake
-
Permalink Reply by Adrian Alderson on
-
$200 shipped
Conrad To said:
how much is a roger bros DH 36?
-
-
$170 delivered
Caspian 'CastoK' Baska said:
How much would randal 180s with 42* baseplates and 83a 4 presidents set me back?
-
-
Blake,
as far as I know there isn't a truck made that you can change the pivot angle on by flipping them. You can change the rake but not the pivot angle and I certainly haven't ever heard of anyone claiming 10 degrees. Grizzly's come in 52 degree and 40 degree, but I only have the 52 degree ones in stock.
Not sure where you got a price of $150 for Randals, O'tangs and bearings, but I couldn't come close, sorry. Just check that the site you have looked at isn't in the USA and that is the before shipping price.blake said:
bears bro the ones u can flip fron 52 to 42 ....do u need special bearings for them ...i was told the axles is bigger ....money is not really an issue but i can get a truck wheel deal (randal n otangs n bearings for 150) but really keen on bears let me know what you can do cheers blake
-
-
i got a quote for $150 off um uan whozarmy off here asra in marketplace forum it could be +shipping i dunno
........ n yeah read on hopkins about bears last night, check it out ......http://www.hopkin.com.au/bear-grizzly-1052s.html read the writing on the right
-
-
Ok, uan isn't a shop, he's a guy selling some stuff, so no overheads, GST, etc and no warrantee if there are issues. I can't and won't try to compete with that.
I have seen stuff like that written about trucks for a long time, but the issue with that is the hangers then don't sit square with the baseplate and therefore the bushings. Those old 1052's have been unavailable for quite a while and would require 10mm bearings. better off with either 50something OR 40 something degree trucks, not trying to get one truck to do both.
blake said:i got a quote for $150 off um uan whozarmy off here asra in marketplace forum it could be +shipping i dunno
........ n yeah read on hopkins about bears last night, check it out ......http://www.hopkin.com.au/bear-grizzly-1052s.html read the writing on the right
-
-
too easy adrain ....cheers for the info
-
Premium MemberPermalink Reply by Caspian Baska on -
how much for just the otangs?
Adrian Alderson said:
$170 delivered
Caspian 'CastoK' Baska said:
How much would randal 180s with 42* baseplates and 83a 4 presidents set me back?
-
-
$80
Caspian 'CastoK' Baska said:
how much for just the otangs?
Adrian Alderson said:
$170 delivered
Caspian 'CastoK' Baska said:
How much would randal 180s with 42* baseplates and 83a 4 presidents set me back?
-
Permalink Reply by jarrod keay on
-
how much for the evo decks??
© 2024 Created by Bugs.
Powered by
