How do you make a concave on a cheap homemade DH deck?
i wanna make a deck and i could also use some info on types of glue or whatever so yeah any info on homemade boards would be sick???
Views: 71
Replies to This Discussion
-
Premium MemberPermalink Reply by charlie harris on -
Join the board builders group, theres heaps of info there
http://www.skateboardracing.org.au/group/boardbuilders
-
Permalink Reply by Matt Ryan on
-
http://www.silverfishlongboarding.com/forum/longboard-board-building/ check that out aswell robbie theres a shitload of board building info in there... and a shit load of other information throughout the other forums there
-
Permalink Reply by James on
-
This site is a pretty good resource too. Has tutorials and junk.
http://users.telenet.be/Toothless/
-
Permalink Reply by Robbie Atkin on
-
cool but i dont get the mould bit?
Dylan Danger Batty said:ok, here is a step by step guide to making a simple concaved board:
1. get 3mm ply from where ever, like maybe 5 sheets
2. get a plank of wood and a thinner plank of wood then glue them together so that the smaller ones sides run paralell to the sides of the bigger plank (this is your mould)
3. liberally apply a crap load of wood glue (most of those white pva glues work fine) to each piece of 3mm ply then put them all together on the mould
4. (this bit takes time, so patience is necesary) clamp down the edges of the deck with as many G clamps as you can find and try to make sure that every bit of the board has some kind of pressure on it.
5. waiiiiit for about 24 hours
6. take it out of the press, cut it into your desired shape then drill the bolt holes using a truck as your guide
that is how i made my second ever board and i still ride it to this day...
-
-
robbie have you read through the silverfish and toothless sites yet they should explain it all..... a mold is a press btw
-
-
yeah i know what is but i cant really be stuffed to make one, did you make one?
Matt Ryan said:robbie have you read through the silverfish and toothless sites yet they should explain it all..... a mold is a press btw
-
-
yeah i dont get part 2.
Robbie Atkin said:cool but i dont get the mould bit?
Dylan Danger Batty said:ok, here is a step by step guide to making a simple concaved board:
1. get 3mm ply from where ever, like maybe 5 sheets
2. get a plank of wood and a thinner plank of wood then glue them together so that the smaller ones sides run paralell to the sides of the bigger plank (this is your mould)
3. liberally apply a crap load of wood glue (most of those white pva glues work fine) to each piece of 3mm ply then put them all together on the mould
4. (this bit takes time, so patience is necesary) clamp down the edges of the deck with as many G clamps as you can find and try to make sure that every bit of the board has some kind of pressure on it.
5. waiiiiit for about 24 hours
6. take it out of the press, cut it into your desired shape then drill the bolt holes using a truck as your guide
that is how i made my second ever board and i still ride it to this day...
-
-
I think he means glue the thin plank in the middle of the big plank with the long sides running paralell so that you have a raised area in the middle over which you will then place your layers of ply.
-
Premium MemberPermalink Reply by Matthys on -
thats sorta what he means
very very basic mold......
scrappy one that was replaced by the vac bag...
© 2024 Created by Bugs.
Powered by
