ASRA - Australian Skateboard Racing Association

Cre8ive Sk8

OK, change of front page.

Just got some goodies from Dave Rogers at Rogers Bros and thought some pics may whet some appetites.

DH 40's
DH 36's
3 Piece DH's
and Mini's

Also have some handles for the learners out there (;-)>

Tags: Adrian, Townsville, a-drain, ado, cre8ive, shop

Views: 9032

▶ Reply to This

Replies to This Discussion


Premium MemberPermalink Reply by Matthys on June 7, 2010 at 17:43
you dont by chance have any sabre bushings do you ado????
Permalink Reply by Adrian Alderson on June 7, 2010 at 20:08
No, sorry. Not too sure if they will sell them seperate to the trucks. Waiting to see if someone starts to import the Sabre gear.

Matthys van lille said:
you dont by chance have any sabre bushings do you ado????
Permalink Reply by Tommo on June 11, 2010 at 16:55
Hey ado just wondering is u had any Rodger bros dh36 decks left, if so how much am I looking at?
Permalink Reply by Adrian Alderson on June 11, 2010 at 20:36
Yes, still got a couple $210 delivered

Tommo said:
Hey ado just wondering is u had any Rodger bros dh36 decks left, if so how much am I looking at?
Permalink Reply by Tommo on June 11, 2010 at 21:35
Ok thanks heaps might call u soon
Permalink Reply by Cooked on June 12, 2010 at 12:07
Hey Ado, do you sell single destructo trucks?
Permalink Reply by Adrian Alderson on June 12, 2010 at 17:59
Sorry, no. I can only buy them in pairs and have never been asked for a single one before.

Callum Hogg said:
Hey Ado, do you sell single destructo trucks?

Premium MemberPermalink Reply by Jack on June 16, 2010 at 15:17
hi ado
how much would i be looking at for:

Rayne Timeline OR landyachtz carbon mummy
Bennett 6.0's
angled risers
1/8th shock pads
2 sets of bolt hardware
O'Tang purple inheats.
some cheap but good bearings (bones reds or something) with spacers and speed rings
Sheet of Grip
a longer kingpin if needed for running venoms.

thanks for this.
Permalink Reply by Adrian Alderson on June 16, 2010 at 21:50
Could do the Carbon Mummy for $380 delivered with all that gear, but think you'd be better off with a 180 truck (Randal, Paris, Grizzley) than the Bennett. The last couple of Timelines I have had have been badly drilled and ran off line so haven't bought any since.

Jack Nolan said:
hi ado
how much would i be looking at for: Rayne Timeline OR landyachtz carbon mummy
Bennett 6.0's
angled risers
1/8th shock pads
2 sets of bolt hardware
O'Tang purple inheats.
some cheap but good bearings (bones reds or something) with spacers and speed rings
Sheet of Grip
a longer kingpin if needed for running venoms.

thanks for this.

Premium MemberPermalink Reply by Jack on June 16, 2010 at 23:58
hmmm. if you think the reverse kingpin would be better im happy to trust your judgement.

i was looking at the angled risers and those wheels because i thought the bennetts would need the risers and be really good for pumping so i probably dont need the risers. would those wheels work really well or would you reccomend others above them?

thanks

Adrian Alderson said:
Could do the Carbon Mummy for $380 delivered with all that gear, but think you'd be better off with a 180 truck (Randal, Paris, Grizzley) than the Bennett. The last couple of Timelines I have had have been badly drilled and ran off line so haven't bought any since.

Jack Nolan said:
hi ado
how much would i be looking at for: Rayne Timeline OR landyachtz carbon mummy
Bennett 6.0's
angled risers
1/8th shock pads
2 sets of bolt hardware
O'Tang purple inheats.
some cheap but good bearings (bones reds or something) with spacers and speed rings
Sheet of Grip
a longer kingpin if needed for running venoms.

thanks for this.
Permalink Reply by Joe on June 27, 2010 at 19:39
Jack,
Still go with the risers even if you get reverse kingpin trucks. They'll pump/carve like a dream if set up right. The inheats would of probably been to big for setting them up on bennets, I'd go with a 4prez 70mm otang wheel or something around the 70mm's like mini hawgs and zigzags. The smaller wheels willl work best on that setup. Hope that helped out ;)
Just give Ado a call when your ready to order. He'll hook you up alot quicker and get it shipped then waiting for replies on ASRA :-)

Premium MemberPermalink Reply by Jack on June 28, 2010 at 11:08
thanks joe thats really helpful, i talked to him via pm and he doesnt have any mummies in stock atm so ill just wait a bit.

Joe said:
Jack,
Still go with the risers even if you get reverse kingpin trucks. They'll pump/carve like a dream if set up right. The inheats would of probably been to big for setting them up on bennets, I'd go with a 4prez 70mm otang wheel or something around the 70mm's like mini hawgs and zigzags. The smaller wheels willl work best on that setup. Hope that helped out ;)
Just give Ado a call when your ready to order. He'll hook you up alot quicker and get it shipped then waiting for replies on ASRA :-)

▶ Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service