ASRA - Australian Skateboard Racing Association

Foot brake soles??

is andy still sellin these?
or for that matter anyone at all?
I'm short for cash and can't afford new shoes haha

Views: 1950

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ash on February 28, 2010 at 19:50
go to the tire shop, ask for a dead tire, get a mate and strip it. takes half an hour, and will give you six soles, all of which will last 10 times longer than any bought sole!
Permalink Reply by Aj Hare on February 28, 2010 at 20:00
sweet as
what kinda glue should I use?
maybe contact glue?
or liquid nails...
Permalink Reply by Ash on February 28, 2010 at 20:10
go to bunnings and pick up a tin of Parafix Contact adhesive. should be under 10 bucks. rough up the back of tire and make sure both surfaces are clean. spread a THIN layer of glue on both sides, wait till its not tacky anymore, and clamp together. have seen it used within half an hour, but for the best stick, leave it clamped for a day!

Premium MemberPermalink Reply by Gabe on February 28, 2010 at 20:12
That wasnt a stupid question at all, he was just wondering what glue works best.
I've found Kwik Grip [contact adhesive] works the best, make sure you clean both surfaces with some acetone before you glue them.

Merrick Wildash said:
One that sticks ... Ask dumb questions get dumb answers ;)

Aj Hare said:
sweet as
what kinda glue should I use?
maybe contact glue?
or liquid nails...
Permalink Reply by Kam Kite on February 28, 2010 at 20:19
yer that works but i found if you spit on it works just as good
Permalink Reply by Joe on February 28, 2010 at 20:27
The stuff Ash said is pretty nuts, I swear he put no glue on my shoe then in the morning it was solid as concrete.
Permalink Reply by Tim Peate on February 28, 2010 at 20:37
strip it? how to and what tools do you use? metal is in most tires!

Ash said:
go to the tire shop, ask for a dead tire, get a mate and strip it. takes half an hour, and will give you six soles, all of which will last 10 times longer than any bought sole!

Premium MemberPermalink Reply by Gabe on February 28, 2010 at 20:44
You peel/cut away the top layer of rubber off the tire, some are easier than others.

Premium MemberPermalink Reply by Benbro on February 28, 2010 at 20:59
yeh maxim tyres seem good,there seems to be a nice amount of rubber over the steel,the steel is the depth you peel from,......
i agree with ash,car tyre is the go,
Permalink Reply by Aj Hare on February 28, 2010 at 21:20
faggot.
straight up

Merrick Wildash said:
One that sticks ... Ask dumb questions get dumb answers ;)

Aj Hare said:
sweet as
what kinda glue should I use?
maybe contact glue?
or liquid nails...
Permalink Reply by Aj Hare on February 28, 2010 at 21:27
Thanks guys...
gonna go dust me a tire now.
Permalink Reply by Pierre G on March 1, 2010 at 20:08
What tools are you using to peel and cut the tyre?

Gabe said:
You peel/cut away the top layer of rubber off the tire, some are easier than others.

▶ Reply to Discussion

RSS

Search

© 2025   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service