wolf shark gas pedal cut outs

Replies to This Discussion

Permalink Reply by Robbie Atkin on June 20, 2011 at 16:23

i think they are more like 35 deg.

• ▶ Reply

Premium MemberPermalink Reply by Skittles on June 20, 2011 at 16:31

I wouldn't say they are quite 45 deg.  Probably closer to 35 like Robbie said.

If I can get a look at one tomorrow I'll let you know

• ▶ Reply

Permalink Reply by Sam Downs on June 20, 2011 at 16:35

I'd try 35 degrees first, cause if u go 45 and you don't like it, your screwed, but if u go 35 and dot think it's enough u can sand it down more

• ▶ Reply

Premium MemberPermalink Reply by Matthys on June 20, 2011 at 17:02

adam mate, you dont need to copy the landy, they are far from perfect...

experiment a bit on some scraps, and im sure that you could come up with something that suits your concave far better!

 

• ▶ Reply

Premium MemberPermalink Reply by Adam on June 20, 2011 at 17:52

Prob gunna go a little flatter cause my concave is quite extreme. Yeah just wondering probably just gunna hack in with a sander an play with it.

• ▶ Reply

Premium MemberPermalink Reply by Steve on June 20, 2011 at 19:08

Ive been using 45 degrees on some FP topmounts

• ▶ Reply

Premium MemberPermalink Reply by Matthys on June 20, 2011 at 19:37

thats sick! ^

 

• ▶ Reply

Premium MemberPermalink Reply by Steve on June 20, 2011 at 20:51

more pics in the FP thread...

• ▶ Reply

Permalink Reply by Dermott Pascoe on June 21, 2011 at 14:51

how did you get them so clean?

 

• ▶ Reply

▶ Reply to Discussion