ASRA - Australian Skateboard Racing Association

Wheels Chewing out

Hey guys..

 

Been having problems with wheels...

 

Got a brand new set of 66mm zigzags on the slalom board i got.. and rode them a few times and the back lip pealed right off.

 

Also.. had a brand new set of 70mm zigs but rode these on the avenger without sliding and it did the same.. but worse. They were about 4 months old but only opened them up and rode them a few days ago.

 

And latest wheels.. 77a Avilas... Have done the same thing on 2 wheels...

 

Just wondering if anyone knows whats up.. if its be being very unluck getting 3 dodgey batches.. or just my riding style?

 

They were all brand new.. NO sliding at all... not even worn in

Views: 43

Attachments:

▶ Reply to This

Replies to This Discussion


Premium MemberPermalink Reply by leeso on February 23, 2010 at 20:51
contact your seller and tell them otherwise contact abec direct...im not sure if it will work but its worth a try just tell him how disapointed with his product u are and dont have the coin to go buying defective wheels.
he may repalce em,, worth a try..goodluck
Permalink Reply by Ashley Armitage on February 23, 2010 at 21:15
Just uploaded the pics.. The avila.. goes into the contact path alot.. Vibrates a hell of alot at high speeds... And the other is the 70mm... Lip folds right back. Dodge photos sorry :(

Merrick Wildash said:
Got any pictures?

Premium MemberPermalink Reply by Steve on February 23, 2010 at 21:29
Thats strange hey! could it be something your riding over? have you ridden all these wheels in the same spot?

I know I did something similar to a big zig after riding over the edge of a path whilst carving hard and putting most of my weight on to it. It was new too
Permalink Reply by Elliot O on February 23, 2010 at 21:31
That Avila photo doesn't really help
Its just some blue, sorry
Thats hectic as, anything rubbing or something?
Yeah i would try hell hard to get my money back
Permalink Reply by Ashley Armitage on February 23, 2010 at 21:33
All happend at different times/places.. the first 66mm was at an estate.. just pumping along on teh road.. the 70mm rode to school 1 day along my rode.realised while i was kicking up a hill cause it was vibrating bad. no footpaths there.. and the avila.. maybe pumping hard. Dont have the proper camera here.. Just my mini cam


Steve said:
Thats strange hey! could it be something your riding over? have you ridden all these wheels in the same spot?

I know I did something similar to a big zig after riding over the edge of a path whilst carving hard and putting most of my weight on to it. It was new too

Premium MemberPermalink Reply by Jacko on February 23, 2010 at 22:31
3 different sets of wheels, 3 of the same defects... i don't think thats a coincidence. my guess is you've ridden over something or smashed em by mistake with something...
Permalink Reply by tom Crane on February 23, 2010 at 22:38
I know avilas chunk like that if u slide/drift at all
The zig is hectic!
Could it be a type of bearing lubricant you are using thats degrading the urethane of the wheels? Just a thought, (probably a wrong one) cause its weird for that to happen on 3 different types of wheels
Permalink Reply by Ashley Armitage on February 23, 2010 at 22:41
I know.. One of the marks in te avila was from me.. But the zigs.. just riding on the road then realise mega vibrations.. But dont know how the second hunk came outta the avila

Jacko said:
3 different sets of wheels, 3 of the same defects... i don't think thats a coincidence. my guess is you've ridden over something or smashed em by mistake with something...
Permalink Reply by Ashley Armitage on February 23, 2010 at 22:43
But there was no driveways.. the avila was from a gutter i think.. The road i skate to school.. No gutters just grass.. its the zigs that im confused about.

Merrick Wildash said:
Im guessing its when you go up/ down driveways on an angle. The outer lip is catching and ripping?
Same thing happened to sector9 cruiser wheels.

But yea, defs not 3 wheels with the same defect.. Your the common factor bro : )
Permalink Reply by Joe on February 23, 2010 at 22:43
Maybe you pump to hard on your slalom board, and carve to hard as well hahaha
Permalink Reply by Ashley Armitage on February 23, 2010 at 22:54
The Avilas and the 70mm wheels were ment to be used jsut straight downhill for me.. No sliding at all. didnt even get to take the 70mm zigs for a spin down a hill. Avilas were rolling on brand new bone reds..and zigs were boardshop ceramics. Doubt that its the problemt.. Maybe... Just unlucky and hit something or got 2 bad batches

tom Crane said:
I know avilas chunk like that if u slide/drift at all
The zig is hectic!
Could it be a type of bearing lubricant you are using thats degrading the urethane of the wheels? Just a thought, (probably a wrong one) cause its weird for that to happen on 3 different types of wheels
Permalink Reply by Brad NS on February 23, 2010 at 22:54
Shark attack ??

▶ Reply to Discussion

RSS

Search

© 2025   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service