nose/tail guards?

Replies to This Discussion

Premium MemberPermalink Reply by DA BEAR on March 28, 2010 at 20:32

Here's a couple.

• ▶ Reply

Premium MemberPermalink Reply by Ian Coggan on March 28, 2010 at 20:51

hhahahaha.. dude just use a magnabend from school or some thing to bend metal. 3mm thick and glue to the front or drill what ever.

• ▶ Reply

Permalink Reply by vmilvydas on March 28, 2010 at 21:34

hey man
boardshop.com.au have a few types, theyre like $10 to $20 im pretty sure, you have to drill them through the board though.

• ▶ Reply

Permalink Reply by Jonty on March 28, 2010 at 23:19

I can't find them...

vmilvydas said:

hey man
boardshop.com.au have a few types, theyre like $10 to $20 im pretty sure, you have to drill them through the board though.

• ▶ Reply

Premium MemberPermalink Reply by DA BEAR on March 28, 2010 at 23:33

NOSE BONE,
you have to drill three 5mm? holes through the deck.

• ▶ Reply

Permalink Reply by vmilvydas on March 29, 2010 at 9:15

theyre on the second page of RAILS-SKIDPLATES
http://www.boardshop.com.au/servlet/the-HARDWARE-%26-GRIPTAPE-cln-R...

• ▶ Reply

Permalink Reply by leighgriffiths on March 29, 2010 at 11:07

http://shop.bombsquadlongboarding.com/category.sc?categoryId=2

• ▶ Reply

Permalink Reply by Ry on March 29, 2010 at 12:25

thanks for all that,

might try the magnabend first...just hope it protects the deck enough, my loki is delaming and i haven't even sent it into a curb! *facepalm*. would rather not have to drill into the deck...but we'll see.

Cheers

• ▶ Reply

Permalink Reply by Jonty on March 30, 2010 at 18:39

Do the boardshop ones only fit trick decks? and how are the mounted?

• ▶ Reply

▶ Reply to Discussion