Nose Guards
Seems theres a bit of interest in these so if you want one for your board i can make one. Just need a template of the nose section (paper, wood) It is better to have the deck to get it perfect.
OK HERES HOW IT WORKS, You send me a paper template, Youll need a peice about 200 x 200. Take the front truck off your board and place paper, or perefably light carboard under the nose and past the truck holes. Trace it, Truck cutout and holes, and make sure its correct cause i will use that as the actuall template by glueing it to my Alum base plate (then i will weld the actuall guard to that) I will also need to know the thickness of your deck, most important..
It is better if i can get your deck or the actuall model deck to make it with, so for those in the Shire im in Caringbah, you can drop it off.
Post the template to:
Colin Olive
623 Port Hacking rd
Caringbah
NSW, 2229
Give me a buzz and tell me its on its way 0418672600.... Price $25....ill post for free.
Views: 5062
Replies to This Discussion
-
Permalink Reply by Col on
-
your on it buddy, maybe Hop shop?
Travis Young said:Ohh true, thanks col ! :). Where is the best place to find people ?
-
Permalink Reply by Travis Young on
-
True, and how much are they ?
-
Permalink Reply by HOltzy on
-
All good on the powder coating Col, I'll sort it out and thanks, I love CF :D. I saw Robbo enquired about getting these in bulk for HopShop but I understand why you prolly didn't go down that road. I too am a perfectionist and would rather custom make as apposed to generic as you are proud of your work. I will say though, that due to the Carbon decks being made in moulds, they SHOULD be very close to identical. So why not make up some Matrix guards? I am more than happy to do the ground work and get your work out there among the other skate shops as well. There are a few Matrix's ripping around Australia and it would be great if they were easily accessible to all. Just a thought mate.
Travis: Guards are $50 for a pair, however you'd have to check with Col on postage seeings how you're interstate
-
-
True, I'm guessing like 50$ or so
HOltzy said:All good on the powder coating Col, I'll sort it out and thanks, I love CF :D. I saw Robbo enquired about getting these in bulk for HopShop but I understand why you prolly didn't go down that road. I too am a perfectionist and would rather custom make as apposed to generic as you are proud of your work. I will say though, that due to the Carbon decks being made in moulds, they SHOULD be very close to identical. So why not make up some Matrix guards? I am more than happy to do the ground work and get your work out there among the other skate shops as well. There are a few Matrix's ripping around Australia and it would be great if they were easily accessible to all. Just a thought mate.
Travis: Guards are $50 for a pair, however you'd have to check with Col on postage seeings how you're interstate
-
-
postage is usually around $10,
Travis Young said:True, I'm guessing like 50$ or so
HOltzy said:All good on the powder coating Col, I'll sort it out and thanks, I love CF :D. I saw Robbo enquired about getting these in bulk for HopShop but I understand why you prolly didn't go down that road. I too am a perfectionist and would rather custom make as apposed to generic as you are proud of your work. I will say though, that due to the Carbon decks being made in moulds, they SHOULD be very close to identical. So why not make up some Matrix guards? I am more than happy to do the ground work and get your work out there among the other skate shops as well. There are a few Matrix's ripping around Australia and it would be great if they were easily accessible to all. Just a thought mate.
Travis: Guards are $50 for a pair, however you'd have to check with Col on postage seeings how you're interstate
-
-
Ohh sweet, so like $60 all up
-
Permalink Reply by Kane Edward (Teaspoon) on
-
holtzy iam in love with yor grip design
-
-
Thanks man :)
kane robert edward said:holtzy iam in love with yor grip design
-
Permalink Reply by Nathan Lim on
-
Can i get some made for the Fat pigeon NSF? will you need a template
-
-
Hey man, I am looking for a 2012 wolfshark nose guard since I already cracked it with one hit. Are you able to make one for me? Do you already have a template?
Thumbs up for your great work!
Yours,
Michel
-
-
Do you have a template for a daddow enty ?
© 2026 Created by Bugs.
Powered by
