Nemmy vs car
hey just a quick storie and some questions about my devostation incident
well i was cruzing on a road in bilambil with jay and lewy and a car came fangin round a corner lewy had to basically dive out of the way and i tried to carve of the road but my nemmy slipped out under my fett and went strait under the wheel. long ways truck to truck. munkae to munkae
herd a mass crack sound and saw the board bend a shit load. after i picked it up it took a while to actually spot the damage. luckily the munkae were fine
but we found a pritty deece crack on the left side of the nose.
and on the right side the ply is seperating a little
So was wundering about how i could fix it or no need or am i due for a new board oh and the crack opens up a littlewhen i carve left
Bill
well i was cruzing on a road in bilambil with jay and lewy and a car came fangin round a corner lewy had to basically dive out of the way and i tried to carve of the road but my nemmy slipped out under my fett and went strait under the wheel. long ways truck to truck. munkae to munkae
herd a mass crack sound and saw the board bend a shit load. after i picked it up it took a while to actually spot the damage. luckily the munkae were fine
but we found a pritty deece crack on the left side of the nose.
and on the right side the ply is seperating a little
So was wundering about how i could fix it or no need or am i due for a new board oh and the crack opens up a littlewhen i carve left
Bill
Views: 105
- Attachments:
-
-
P1000641.JPG, 1.5 MB -
P1000645.JPG, 1.2 MB
-
Replies to This Discussion
-
Permalink Reply by Alex on
-
It could be de laminating, in that case it'll have a limited lifetime. My Glyde drop through started to split after an early grab, after that I just rode it till it broke.
-
ASRA AdminPermalink Reply by Bugs on -
To add photos, click the "camera" icon on the toolbar:
This way they'll show up directly in your post instead of as links.
-
Premium MemberPermalink Reply by Matthys on -
stuff some araldyte in there and clamp, then ride it till it snaps fully, or you could just stick a strengthening rod crossways along the board where the crack is.
-
Permalink Reply by Billy O'Donohue on
-
How will you fix it man
otherwise I might try some glue or something and get the most out of it as I can
Merrick Wildash said:Give er to me next time i see you. Ill fix it! (fixing in some cases may and may not actually get fixed)
-
Permalink Reply by Ryan 'RY RY' Peterson on
-
this happened to my mate, but the caarnage wasnt as bad. i feel for you man, all he did was put 'qwik grip' in there and clamp for 1 hour. or u could just tape the f**k outa it.
© 2024 Created by Bugs.
Powered by
