ASRA - Australian Skateboard Racing Association

Custom Face Shields For Helmets

I Have Heard There Are 2 Main Ways For The Overall Shape For The Full Face Custom Shield.

1. Being The Solid Shield That Is The Shape Of The Face Opening And Is Fastened To The Helmet
2. Is The Face Shield That Can Be Lifted Like A Normal Motorbike Helmet.

Im Looking At Doing The Opening Shield As In he Day I Like To Ware Sunglasses, But I Was Wanting To Know Of Any Handy Little Tips By Experience i.e. Tinting, Little Vents ect.

Tags: Face, Full, Helmet, Shield

Views: 241

▶ Reply to This

Replies to This Discussion


Premium MemberPermalink Reply by Fendy on April 29, 2009 at 14:51
y r all ur words starting with capitals??? it's hard to take u seriously man
Permalink Reply by Joe on April 29, 2009 at 17:30
HaHaHaHaHaHaHa ThAt Is TrUe JaCkO.

Jacko said:
from the place that doesnt write with capital letters at the start of each word....

Premium MemberPermalink Reply by Oliver Dowie on April 29, 2009 at 19:39
Haha, good call

Jacko said:
from the place that doesnt write with capital letters at the start of each word....

Premium MemberPermalink Reply by jay cottrell on June 18, 2009 at 2:04
how did you bend the poly into shape ?

Joe said:

Here is a bell helmet with a flip polycarb visor it looks pretty good.
Permalink Reply by leighgriffiths on June 18, 2009 at 2:13
thin polycarbonate is extremely flexible

Premium MemberPermalink Reply by Fendy on June 18, 2009 at 2:30
You could also heat it with a torch to give it a more permanent shape
Permalink Reply by BJ on June 18, 2009 at 12:18
Yeah i used the wife hair dryer on the poly using the slow fan speed i will put pics up of the finished product of mine

jay cottrell said:
how did you bend the poly into shape ?

Joe said:

Here is a bell helmet with a flip polycarb visor it looks pretty good.
Permalink Reply by Bozac on June 30, 2009 at 13:32

followed the instructions on here and silverfish and it worked out easier than i expected, plus my first cut out worked so i have enough polycarb left to make more if it gets scratched up. thanks for the advice
Permalink Reply by stephen.mhsrider on July 1, 2009 at 21:08
tim, what is that silver helmet? looks rad
Permalink Reply by api ihaia on August 19, 2009 at 20:15
how do you keep the visor from fogging my mates one always does
Permalink Reply by Gilbert on August 19, 2009 at 20:51
get some shaving cream and wipe it on the inside of the visor, then wipe with a clean paper towel. problem solved (not permanently though)
Permalink Reply by Dan Mactaggart on August 19, 2009 at 21:48
anyone got a visor plan for a fox rampage?

cheers

▶ Reply to Discussion

RSS

Search

© 2025   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service