i think i just....
bought an epipen.
and before you say it...i know i know...i didn't NEED it... i just WANTED it.
so...i'm thinking i'll try my kooks on it...and i'll have to get some more randals....gee...what a shame....
has anyone ridden an epipen or CLB or a double drop (drop mounted dropped platform) eg: d'seed, JimZ, etc...what do we think?
and before you say it...i know i know...i didn't NEED it... i just WANTED it.
so...i'm thinking i'll try my kooks on it...and i'll have to get some more randals....gee...what a shame....
has anyone ridden an epipen or CLB or a double drop (drop mounted dropped platform) eg: d'seed, JimZ, etc...what do we think?
Tags: CLB, Double, boards...., drop, epipen, money, more, on
Views: 57
Replies to This Discussion
-
Permalink Reply by leighgriffiths on
-
talk to leafoot. he loves his CLB.
did you buy it from that aussie guy on silverfish?
-
Permalink Reply by nick on
-
I have a dseed and..its... amazing
I love it. It feels alot better than a drop-through as doesn't have as much of a 'swinging' turn as a dropped deck. The small drop it does have means that you still have something to rest your back foot against and probably makes it a little more drifty than a drop-through.
-
Permalink Reply by Ben on
-
[quote: Daveydynamite]
length 1045mm/41"
wheelbase 815mm/32"
platform 660mm/26"
platform front width 245mm/ 9 5/8"
platform tail width 215mm/ 8 1/2"
flat angular cave flat spot 150mm/6"
concave depth 12.5mm/1/2" (not sure on this might be a bit more)
drop 25mm/1"
universal drop thru takes bears, force and randal(what i own) i assume it'll take crails and holeys.
[/quote]
i'm now trying to decide whether or not to run it on my kooks....or get some randals.....i guess i'll just try both and see....
-
Premium MemberPermalink Reply by Jacko on -
kookys will be too low for double drop boards...
i tired smokies on the demonseed and they were too low it bottomed out when turning hard, kookys are just as low as smokies...
-
Permalink Reply by Hop on
-
We just got all the new randal downhill baseplates in - angles angles angles - 28 degree, 35 degree, 50 degree, 60 degree and 42 degree. Plus 3 inch zinc kingpins for big bushings.
They be up on the hopkin racing website soon
So you can wedge or de-wedge randals on dropped boards
-
Premium MemberPermalink Reply by Jacko on -
or topmount the trucks...?
-
Permalink Reply by davey on
-
i ridden this with force, grizzlies and randal. id go with randals it suits the board. force eh im not sold on forces anyway and grizzly lean too much and i feel they will bottom out.
dave
-
-
i just realised i have a set of R2's in the box that just need 2 new kingpins....i'm such a moron.
but i'm allowed to be, its my birthday.
so, epipen on R2's....i'm wondering if the 50* in the rear will be too much...35* perhaps...
so the:
- evo will be getting (1) 10* riser in the front, riser(no wedge) tail.
- DHR will get 77mm 88a strikers and stay on the C2's and 1" risers
- epipen will get 180 R2's all round with 76 flys...but may hate to top mount it.
-CPR will stay the same.
- mal is getting the bennet/rtx setup.
-mal gear is going on the slalom board
any suggestions? will i need bigger wheels for the pipen? or top'd with 76's it'll be fine?
thanks guys.
-
Permalink Reply by SteveC on
-
I've got a 42° sitting there doing nothing...
looks like davey had it on strikers, so your flys should work.
gunna be a sick setup.
© 2024 Created by Bugs.
Powered by
