ASRA - Australian Skateboard Racing Association

ive had the new hustler for about a month now, and i just noticed a stress crack.

any suggestions on what i can do?

Views: 90

Reply to This

Replies to This Discussion

wheres it at?? take a photo?
You have 2 options
As long as it isn't in a flext section of the board like the middle
Apply pva glue to the affected area
Then dip your balls in the wet glue and allow to dry
what is the second option?
Man up, inject wet cement into your urethra Nd skate it like you've never skated it before
LOBBY wtf? he asked an honest question, why say this type of shit?
no one wants to know what you do with your genitalia.

not cool
depending on its location a lil 5 minute epoxy might work, though if its in a high stress area it won't really help to prevent further cracking
I think lobby knows him, it was a joke

Ian Coggan said:
LOBBY wtf? he asked an honest question, why say this type of shit?
no one wants to know what you do with your genitalia.

not cool
the crack is about 2cm long, and it starts at the bottom of the drop through cutout.
Is it through the wood or just the glass?
its through the bottom layer of fibreglass, the wood, but the top layer of fibreglass is fine.

James said:
Is it through the wood or just the glass?
I think jezza is right about it breaking again if you fix it. If it has been caused by the stresses of normal riding and not an impact, it will most probably return when you start riding it again.

Pics would help us see how bad it actually is. I reckon your two choices are to continue riding it and keep an eye on the crack to make sure it doesn't get worse, or take it back to where you got it and see what the go with warranty is
It was probs caused because you sent it 10 feet in the air off a gutter
It will survive

Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service