Nose Guards
Seems theres a bit of interest in these so if you want one for your board i can make one. Just need a template of the nose section (paper, wood) It is better to have the deck to get it perfect.
OK HERES HOW IT WORKS, You send me a paper template, Youll need a peice about 200 x 200. Take the front truck off your board and place paper, or perefably light carboard under the nose and past the truck holes. Trace it, Truck cutout and holes, and make sure its correct cause i will use that as the actuall template by glueing it to my Alum base plate (then i will weld the actuall guard to that) I will also need to know the thickness of your deck, most important..
It is better if i can get your deck or the actuall model deck to make it with, so for those in the Shire im in Caringbah, you can drop it off.
Post the template to:
Colin Olive
623 Port Hacking rd
Caringbah
NSW, 2229
Give me a buzz and tell me its on its way 0418672600.... Price $25....ill post for free.
Views: 4862
Replies to This Discussion
-
Permalink Reply by Col on
-
Can make guards for anything....need a wood template or deck, deck is best will fit perfect then. No paper templates as i have to then make a wooden one and its to much work.
Jose Edgardo Navarro said:hi, can u make ones for the phat drop from fat pigeon boards? plz reply if u need the template or not
-
Permalink Reply by jesse craven on
-
hey man, would it be possible for me to buy two nemesis noseguards.? ive got a delite nemesis on the way so i cant send you a template, but i assume that you have done nemesis ones before. all good if you cant without a template. thanks :)
-
Permalink Reply by Leon Abe-Weatherhead on
-
can you use the templates more than once? if so do you have a vandal template lying around for both mounting options?
-
Permalink Reply by Ben Rainford on
-
are you still making them?
- ‹ Previous
- 1
- …
- 14
- 15
- 16
- Next ›
© 2024 Created by Bugs.
Powered by
