wheelbite on comet voodoo doll d2??

Replies to This Discussion

Premium MemberPermalink Reply by The Dave on July 28, 2012 at 18:09

I run the same setup and the answer is no.....or at least you'd have to be doing some pretty extreme carving at walking pace to get bite. 

• ▶ Reply

Permalink Reply by 0g0juyzqu1uh3 on July 28, 2012 at 18:54

if you do you can just chuck on some risers!

• ▶ Reply

Permalink Reply by daniel allen on July 28, 2012 at 19:47

yeah i only weigh about 55kg so i should be fine, ill put some venom eliminators in if it bites.

thanks
 
The Dave said:

I run the same setup and the answer is no.....or at least you'd have to be doing some pretty extreme carving at walking pace to get bite. 

• ▶ Reply

Permalink Reply by Jacob Manning on July 29, 2012 at 17:12

yer and generally with cals any bite issues can be solved with putting a cupped washer boardside

• ▶ Reply

Premium MemberPermalink Reply by The Dave on July 29, 2012 at 21:28

Yeah, I weigh a.....teensy bit*.....more than 55...... so if I can't get bite you will NOT get bite unless you're planning to run the world's softest bushings.

* "teensy" if you were to compare it to, say, the mass of the Earth...

daniel allen said:

yeah i only weigh about 55kg so i should be fine, ill put some venom eliminators in if it bites.

thanks
 
The Dave said:

I run the same setup and the answer is no.....or at least you'd have to be doing some pretty extreme carving at walking pace to get bite. 

• ▶ Reply

Permalink Reply by Billy Bott on July 30, 2012 at 17:18

comet have boss wheel wells, i used to run cal 44's with no risers with bigz on a grease shark, and i only got wheelbite with super loose trucks (90a cones and 90a barrels- i weigh almost 90kg)

• ▶ Reply

▶ Reply to Discussion