Cre8ive Sk8

OK, change of front page.

Just got some goodies from Dave Rogers at Rogers Bros and thought some pics may whet some appetites.

DH 40's
DH 36's
3 Piece DH's
and Mini's

Also have some handles for the learners out there (;-)>

Tags: Adrian, Townsville, a-drain, ado, cre8ive, shop

▶ Reply to This

Replies to This Discussion

Permalink Reply by Adrian Alderson on June 7, 2011 at 23:34

If I've still got a set $75

▶ Reply

Premium MemberPermalink Reply by Connor Ferguson on June 8, 2011 at 0:07

Okay cheers. Please let me know if you still have them soon then ill give you a call and arrange something

Adrian Alderson said:

If I've still got a set $75

▶ Reply

Permalink Reply by Mark Gorman on June 8, 2011 at 13:29

Hi Adrian

Old Comp 2 had a 45"edge running from the top surface area of the wheel outwards down towards the hanger, say like a Bones mini cubic has a round edge ,Krytonic Kryptos had a 72" edge,, Comp 2 & Snake 2 had a 45" edge to get you over coping ,also reduce wheel bite into old school base plates and risers eg Tracker 85mm ACS 500 &800, Trucks etc could not run wheels over 60mm as thay would hit the base plate

Adrian Alderson said:

Mark,

by "inside edge" do you mean like a chamfer at the lip or all the way back to the hub?

Cheers

Ado

Mark Gorman said:

Looking for NOS or reissue Sims Comp 2 or anything with a 45' deg inside edge between 70 and 60mm

Cheers

Mark

▶ Reply

Permalink Reply by Adrian Alderson on June 8, 2011 at 21:27

One set left. I stuck your name on them if you want them.

Connor Ferguson said:

Okay cheers. Please let me know if you still have them soon then ill give you a call and arrange something

Adrian Alderson said:
If I've still got a set $75