Yea, I saw them in Dalies the other day which is cool. Hopefully they sell well. Hoping to get to Europe again. Gotta save the pennies. Are you racing anywhere overseas this year?
Spent the drive from Radelaide to the snowies reading your new heelside issue. Super rad magazine. The quality is awesome. Normally, if I were to buy a CW I would read maybe 3 stories and skip the rest. I read everything in Heelside with a lot of interest.
The usual wear on the fingers, takes a long time to get through.
The spectra I couldn't seem to locate?
Most comfortable gloves I have ever worn by far!
hey mate thanks heaps but it looks like i left the flights too late and its gonna cost me heaps to get there...hope the race is good and looks like we will have a 3rd pumpstation champion without either of the first 2 competing..next year we'll all be there to fight the battle...cheers leeso
hey trav i know its a long shot but any room at the pump station race i just found out i can get the time off work and id be stoked if i could come down and defend my title from last year and get the all needed race practice for newtons...
cheers mate
Hey Trav,
I'd make sure you go 10mm axles and you should be alright running double wide wheels. The threads inside your Zealous are 3/8" UNC which is just smaller than 10mm. So you could get a piece of precision ground 10mm steel and get someone to turn the threads 3/8" UNC for the inside to screw into the hanger and 3/8" UNF and just use kingpin nuts as axle nuts. Unfortunately we only have one lathe at work and its never available for foriegn orders. You could try asking Steve from the Mtns. I think he has access to a workshop. Cya saturday for a secret Pumpstation session eh?
Hey Trav,
Just wondering if you were still interested in the OMNI.
There is another interested but you asked first so you get preference, let me know asap.
cheers,
Ry Ry
i believe that its one white/cream 'horsabout' glove with velcro puck......
by up here you would mean sydney yes?
let me kno , isnt a problem to post it up ...
xox
Trav's Comments
Comment Wall (32 comments)
You need to be a member of ASRA - Australian Skateboard Racing Association to add comments!
Join ASRA - Australian Skateboard Racing Association
Premium MemberDani said…
Hey,
Yea, I saw them in Dalies the other day which is cool. Hopefully they sell well. Hoping to get to Europe again. Gotta save the pennies. Are you racing anywhere overseas this year?
Premium MemberDani said…
Hey dude,
Spent the drive from Radelaide to the snowies reading your new heelside issue. Super rad magazine. The quality is awesome. Normally, if I were to buy a CW I would read maybe 3 stories and skip the rest. I read everything in Heelside with a lot of interest.
Stoked! Once I have some money I will subscribe.
happy to do one for you bro,
how big do you want it? position on the board? how many logos? want the asra one on it too? do you want it straigh cut out or inlayed? Colour tape?
PEACE
im chewing gum constantly
you should join me for some pk some time
Or this sunday alternatively
10am at darling harbour is the Sydney Massive Chewing Gum Meetup
0425 269 287
Premium MemberMack Daddie said…
The spectra I couldn't seem to locate?
Most comfortable gloves I have ever worn by far!
Premium MemberMack Daddie said…
Do you remember where you got those black wolf gloves from?
the pair you sold me yonks ago,.
Premium MemberDani said…
Think I found a lift up to Bathurst with an SA guy. Not 100% yet but hopefully. Will let you know, cheers for the offer, might still hit you up.
Premium Memberleeso said…
Premium Memberleeso said…
cheers mate
Premium MemberAlex said…
Premium MemberPhil Bartlett said…
look forward to seeing the mag. Let me know if there is anything you need from up here.
I'd love an add in the mag. How much??
Cheers mate
Ado
Premium MemberFitz said…
I'd make sure you go 10mm axles and you should be alright running double wide wheels. The threads inside your Zealous are 3/8" UNC which is just smaller than 10mm. So you could get a piece of precision ground 10mm steel and get someone to turn the threads 3/8" UNC for the inside to screw into the hanger and 3/8" UNF and just use kingpin nuts as axle nuts. Unfortunately we only have one lathe at work and its never available for foriegn orders. You could try asking Steve from the Mtns. I think he has access to a workshop. Cya saturday for a secret Pumpstation session eh?
Just wondering if you were still interested in the OMNI.
There is another interested but you asked first so you get preference, let me know asap.
cheers,
Ry Ry
Premium MemberOliver Dowie said…
by up here you would mean sydney yes?
let me kno , isnt a problem to post it up ...
xox
Welcome to
ASRA - Australian Skateboard Racing Association
Sign Up
or Sign In
Or sign in with:
Search
© 2024 Created by Bugs. Powered by
Badges | Report an Issue | Terms of Service