Will Smith's Comments

No problem Will - yeah, I dont expect the base will need to be too much - maybe even just some thin ply - good luck, let me know how you get on!  Deeks

yeah - I always put wood under my foam - I reckon you'd run the risk of the foam yeilding to the bend before the ply/veneer down..  I just got some kwik-grip spray on adhesive and stick the foam down to the board..

Here ya go mate. Straight from the horses mouth...

http://joewoodworker.com/veneering/makingbags2.htm

This is where I found the info.

Yeah - I generally have cut a board the same width as the foam mould - usually just a bit of cheap pine (round the edges with sandpaper to avoid damaging the bag) - and about 100mm or so longer than the project.  The last one I just used a bit of chipboard cated with malamine (you know, the white smooth stuff) that was 1200x300 - didn't even both to trim it down...  The advantage of the bigger bag is you can really grab the sides and pull them out while you vacuum it down - allows you to realy apply some seriouos pressure.

Hey Will - nar I have the 70" x 20" bag... I spoke to the guys at Roarockit about the smaller bag and they reckoned I'd have some issues with the 47x14 - espescially with drop decks - I got it directly from them which was cheaper than the 47x14 but then cost about $60 to ship to Australia...

I could make on for you for about $15-20, but i would have to make a template of your helmet first

Here's a picture of my visor. I could make one for you if you wanted.

Hey will, what helmet do you have?

Sorry I just bought a carbon belly racer

Reopening Grom Bomb soon, keep an eye out.

Send me some pics. vinc.tsui@gmail.com

You wouldn't happen to have indys as well would you?

Your ad is fucked - redo it. How much?

ahk...go to market place, click on "my ads"(located underneath the market place heading on the left.. once on that click the delete button next to edit, very simple

you may have already picked some trucks up, but your threads still up on market place so i'll ask anyways...im selling some 2010 bear 852's for $70, you interested?

Hey man

http://maps.google.com.au/maps?q=Glossop+rd+linden&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&hl=en&sa=N&tab=wl

at the end of Glossop Rd Have a look on Google maps.

nah i didnt..pissed off. i may go anyway..hop today?

Hey man, marketplace not working.

Have you had much interest in your indy 215's?
Would you trade Indys for a set of Bear 852s (older square base plate style) + $14 for new bushings? Good condition, usual scratches from general skating.
If you're interested text me your number and I'll shoot you some pics. 0415315868

Finn