Oh! Bummer dude........
Well if you wanna come by and pick it up that's fine. Gimme a call to arrange a time. 0415 684 089
You sure you can't make it on sunday. It's gonna be a rad day of riding. I think we're gonna have a good turn out.
All good to go.
PPS Jason Mitchell RacerX deck.
4" Wedged Bennet front with special Orange/White hourglass Khiro bushes.
4" Double wedged RTS with Venom DH bushes.
Force 70mm 75A wheels.
Rock N Rons Bearings.
Hope you can make it Sunday. I'll bring the cones too.
its just a spot we skate d/h at...tech as in corners and speedchecks and pre-drifts are a must...or you can footbrake but it makes it a bit boring...good slide spot aswell...
Hey Jack,
See if you can make it down next Sunday for Church of Slalom. I've got the board parts together, just gotta assemble it and tune it for you. Perfect chance to try it through the cones with a real race timer.
Lettuce know if you can make it.
I spose the best way would be to give the stuff to nath in canberra. You can drop by his and pick it up.
I live down in Miranda which is near cronulla. I'd doubt you'd wanna travel that far. You can if you want then I can set it up to suit you and show you some finer points.
I've got a board I made that just needs to be drilled and finished off, plus I gotta put it all together after I get the rear truck so it's gonna take at least a week or 2 unfortunately.
Hey dude,
I had a look down the garage and I can hook you up with a bennet front truck and I'll get a new Tracker RT-S for the rear. I'll put some premium bushes in them and tune em ready to shred. Plus some slalom wheels and bearings.
These will be yours to keep in trade for a set of sidewinders.
Like I said I'll let you borrow a board and cones so you can have a serious go at proper slalom racing. If you don't like it just return the borrowed board and cones.
I'm hoping Nathan can take you out for a roll to show you the finer point because he lives alot closer to you than I do.
Are you coming to canberra for CHC next month. If you can that would be rad because I can just hand the gear over there to save on shipping plus you can have a go at racing! Nath and I can train you up and you're in!
They will replace it, send them photos and tell them what happened. They replaced mine. And when you get a new one, trade it for my L37. My l37 is only like 2 months old, few scratches on the bottom. But nothing bad. What do you think?
Good mate, how about yourself? - You on holidays at the moment? I'm guessing yes, cause there's been heaps of grommies hanging in the water the last few days. Good waves near Cronulla on Thursday. Surfed for 4 hours. Best waves i've had in a while i reckon.
Been skating a bit but my wrist is still sore from that stack at CHC so just have to take it easy.
yeh goin alright,been gettin over a shoulder injury still,that i got riding mount keira about a month ago,ive still been rollin heaps,but tryin my best not to crash as it would put back my recovery.i wanna be fit for a few downhill races comin up,im not big on slalom but the ditch race is gunna be fun,good to see you there,you get a bit of practice before they start timed runs so you can get the hang of it,ill see ya on the weekend..
Jack meyn's Comments
Comment Wall (63 comments)
You need to be a member of ASRA - Australian Skateboard Racing Association to add comments!
Join ASRA - Australian Skateboard Racing Association
Premium MemberFitz said…
Well if you wanna come by and pick it up that's fine. Gimme a call to arrange a time. 0415 684 089
You sure you can't make it on sunday. It's gonna be a rad day of riding. I think we're gonna have a good turn out.
Premium MemberFitz said…
PPS Jason Mitchell RacerX deck.
4" Wedged Bennet front with special Orange/White hourglass Khiro bushes.
4" Double wedged RTS with Venom DH bushes.
Force 70mm 75A wheels.
Rock N Rons Bearings.
Hope you can make it Sunday. I'll bring the cones too.
Premium MemberBenbro said…
Premium MemberBenbro said…
Premium MemberFitz said…
See if you can make it down next Sunday for Church of Slalom. I've got the board parts together, just gotta assemble it and tune it for you. Perfect chance to try it through the cones with a real race timer.
Lettuce know if you can make it.
Premium MemberFitz said…
I live down in Miranda which is near cronulla. I'd doubt you'd wanna travel that far. You can if you want then I can set it up to suit you and show you some finer points.
I've got a board I made that just needs to be drilled and finished off, plus I gotta put it all together after I get the rear truck so it's gonna take at least a week or 2 unfortunately.
ye we live on the north shore and we just went up tot eh central coast for a day but ye we would bee keen for a role if ur free oneday..
Premium MemberFitz said…
I had a look down the garage and I can hook you up with a bennet front truck and I'll get a new Tracker RT-S for the rear. I'll put some premium bushes in them and tune em ready to shred. Plus some slalom wheels and bearings.
These will be yours to keep in trade for a set of sidewinders.
Like I said I'll let you borrow a board and cones so you can have a serious go at proper slalom racing. If you don't like it just return the borrowed board and cones.
I'm hoping Nathan can take you out for a roll to show you the finer point because he lives alot closer to you than I do.
Are you coming to canberra for CHC next month. If you can that would be rad because I can just hand the gear over there to save on shipping plus you can have a go at racing! Nath and I can train you up and you're in!
Premium MemberFitz said…
Been busy lately. I'll take a look at what I've got and let you know tomoz.
A flexdex l37
And a homemade shorty
JUst wanting to get rid of and maybe trade my l37 away. and i know you said you wanted one. sall good.
Premium MemberAlex said…
Been skating a bit but my wrist is still sore from that stack at CHC so just have to take it easy.
ASRA AdminBugs said…
Premium MemberBenbro said…
Welcome to
ASRA - Australian Skateboard Racing Association
Sign Up
or Sign In
Or sign in with:
Search
© 2024 Created by Bugs. Powered by
Badges | Report an Issue | Terms of Service