wanted - Slalom setup.

so it's about time i got myself a proper slalom setup. before i hit up the hop shop, does anyone have one they're looking to let go of?

looking for a complete less a front truck, i guess (already got a bennet i can use). but if you have just a deck i'll consider that too.

Replies are closed for this discussion.

Replies to This Discussion

Premium MemberPermalink Reply by DA BEAR on December 1, 2008 at 18:21

Hi Jon,
Not sure if your interested but i got the pps retro screamer from jimmy,(one of the guys down here)
See
http://www.charliedontskate.com/bb2/viewtopic.php?t=3660

http://www.tailtap.com/pcketpistolsdecks.html
scroll down to see the screamer.

and i'm using that for slalom.
Its now got a red powell nose bone,(for the run aways),
and extra rear truck mount holes for multiple, (3) rear wb's.
Deck only $45 plus postage about $20.
Wayne.

Permalink Reply by Fletch on December 2, 2008 at 10:51

Ash has a PPS also

Permalink Reply by Jon B on December 16, 2008 at 21:51

hey mate sorry about the delay in replying. that pps looks like it'll suite nicely. i'll take it if it's still available!

DA BEAR said:

Hi Jon,
Not sure if your interested but i got the pps retro screamer from jimmy,(one of the guys down here)
See
http://www.charliedontskate.com/bb2/viewtopic.php?t=3660

http://www.tailtap.com/pcketpistolsdecks.html
scroll down to see the screamer.

and i'm using that for slalom.
Its now got a red powell nose bone,(for the run aways),
and extra rear truck mount holes for multiple, (3) rear wb's.
Deck only $45 plus postage about $20.
Wayne.

Premium MemberPermalink Reply by DA BEAR on December 17, 2008 at 17:37

Hi Jon,
Heres some photos, cosmetically the graphics got o couple of scratches from being transported but its 90%
there.
The original w/b inner/inner is 16in on the flat, i drilled a 17in on the flat, and a 191/2 in on the kick then
dewedged it,
i like the truck on the kick cos when your pumping it feels like your pushing against the kick, feels a bit
more locked in.
Photo near the rear truck holes shows some suface/paint crack. Concave is about 1/4in.
Price, i was wanting $45 for the deck and the nosebone,(trucks/wheels/wedges not inc) $20 express postage,
inc $50 insurance, depending on the weight i'll see what else i can stick in, bolts, backup dvds?
(e) wdj_humphrys@optusnet.com.au (paypal to that address)
mob 0411 427 467.
Wayne.

Attachments: