ASRA - Australian Skateboard Racing Association

Hey guys, I've got a massive 46 inch Sector 9 Deck that I've had for nearly a year. I've got some pictures uploaded. The problem is, I don't know what the name of the board is, nor its stats to check it out - I'm thinking it's discontinued.

Anyone have a clue as to what board it may be?

Description;
46 Inch
Sector Nine
Graphic of a beach - photo by "frieden"
U shaped concave
single kick at the back end
wheel wells
Flex is evident. Comparable to that of a Madrid Dream, or Rayne Vendetta [or along those lines]

Tags: 46', 9, Sector, pintail

Views: 79

Attachments:

Reply to This

Replies to This Discussion

the board hasn't been discontinued, just the graphic. Can't find the origional name of the board you've got but the board that replaced it is the lombok. specs:

Deck: 7 Ply Maple - Camber - Concave
Specs: 46.0" L x 9.5" W x 31.75" WB
Trucks: 9.0" Gullwing Alpine
Wheels: 70mm/78a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Full Grip Tape w/ Die Cut Logo, 1.5" Bolt Pack, 5/16" Mini Risers

sector 9 keep the same press and just put a different photo on the deck each year.

Sick as. Thanks for the heads up. Although, I'd like to customise the board because it has real insane wheel-bite. Any recommendations to change the stock setup?
Really hard to do much to sector 9's carve boards in the way of freeride, they just have too much wheel bite. Only thing i'd suggest is some new wheels (not to big or they'll bite) and maybe some fresh bushings (probs around 86-87 duro) to liven it up.
Truck risers will give you more clearance but can make it awkard to footbrake or push with the extra height.


Ervin Nunez said:
Sick as. Thanks for the heads up. Although, I'd like to customise the board because it has real insane wheel-bite. Any recommendations to change the stock setup?
Yeah, wheelbite's a bitch. I bought shock risers for the deck and found it was too high and felt really uncomfortable. But then again, I was only a beginner Longboarder back then - didn't know which deck to get. Should have gotten the S9 burleigh...

But yeah, nowadays, I've got 4 decks to play with. The "lombok" that this thread's about, Madrid Dream as my main freeride deck, my Loaded Vanguard Custom (Had it run over and snapped, so I've chopped off a bit and redesigned it to be somewhat like a slalom board) and a little skateboard project i'm working on - trucks on the kicktails. =3 Should be fun

But yeah, thanks y'all for all your help.


Fitz said:
Truck risers will give you more clearance but can make it awkard to footbrake or push with the extra height.


Ervin Nunez said:
Sick as. Thanks for the heads up. Although, I'd like to customise the board because it has real insane wheel-bite. Any recommendations to change the stock setup?

Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service