ASRA - Australian Skateboard Racing Association

Sliding wheels

Hey guys, I have Been longboarding for a while now
And I have 70 mm 83a stimulus oragatangs on my sector 9 super Shaka but
They are already coneing and some better sliding wheels, what should I get

Views: 416

▶ Reply to This

Replies to This Discussion

Permalink Reply by Evan Johnston on September 8, 2011 at 22:27
It's not drop thru and the wheel cut outs army that big, cause I get wheel bite with 70mm
And I've only had them for about 3months and I've gone through about 2mm of urathane

Tuure Pineapple said:

isnt the board drop-through with giant wheel cut outs??? Also who cares if the wheels are coning!!! That means they slide better. You should see my Early Blueys, they are like 48mm, I still ride them.


Premium MemberPermalink Reply by m0juu on September 8, 2011 at 22:35

once you start blasting bigger slides you will be eating at least one mm per session. it will happen just skate and enjoy in the meantime

Permalink Reply by Evan Johnston on October 11, 2011 at 10:24
I don't really care about losing mms any more, I got some 80a zombie hawgs and I can hold out my slide for about 8ft
I just want wheels that slide like as if your in the wet or on dirt
Any ideas??

Tuure Pineapple said:

Dunno why i thought it was drop through, just the shape I guess. Either way 2mm really? Are you going to get new wheels everytime they lose a couple of mils???? I've had my blueys almost 3 months now, they have lost over 20mm of urethane.
Define "Better sliding wheels," wheels that slide for you? Wheels that last forever?

83a Stims are the better wheels on the market these days.
 

Evan Johnston said:

It's not drop thru and the wheel cut outs army that big, cause I get wheel bite with 70mm
And I've only had them for about 3months and I've gone through about 2mm of urathane

Premium MemberPermalink Reply by Jacko on October 11, 2011 at 12:26
Permalink Reply by Philip and Hugh on October 11, 2011 at 16:56

retro freerides bro. 89a

Permalink Reply by Evan Johnston on October 14, 2011 at 19:10
Really, I got a couple pair of wheels over 86a and I thought they were abit scratchy and rough
But I will give 'em a try ( I doubt the every wheel over 86a is to rough)
Thnx man

Philip and Hugh said:

retro freerides bro. 89a


Premium MemberPermalink Reply by Skittles on October 14, 2011 at 19:38

Any hard wheel is going to be rough... 89a retro thane slides like hard plastic or like you were on ice or dirt.

 

If you want a smooth wheel, go a softer thane and learn to slide with a bit of resistance being thrown back at you

Permalink Reply by Cameron Taylor on October 16, 2011 at 20:06

abec 11 classic freerides are fun but are already wearing down fast after 2 days of skating them

Permalink Reply by Evan Johnston on January 29, 2012 at 19:49
Do they sell the retros 89a on hopkin?

Skittles said:

Any hard wheel is going to be rough... 89a retro thane slides like hard plastic or like you were on ice or dirt.

 

If you want a smooth wheel, go a softer thane and learn to slide with a bit of resistance being thrown back at you

▶ Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service