ASRA - Australian Skateboard Racing Association

Rayne killswitch

Hey just wondering is the rayne drop killswitch as strong as the topmount. Is it better of getting the drop through because you have options 

Views: 331

▶ Reply to This

Replies to This Discussion

Permalink Reply by Joe Campbell on March 1, 2011 at 9:27
no!!!! its by far less strong than the topmount because of the forking!! and it de-lam very easily!!! i made the mistake of getting the dropped one and its completley fucked!! its still a very rad board though :D

Premium MemberPermalink Reply by Skittles on March 1, 2011 at 10:42

I have made ply inserts for the cutouts, then plates to go on top to strengthen it.  I don't know about de-laming, but the bamboo will get fucked if you stack it all the time then ride it in the rain without sealing the wood again, as with any board.

 

If you don't want to worry about destroying it, or want to thrash it, don't buy it, buy a Glyde DILLIGAF from Pete, it will last forever.

 

Also, try the topmount and drop-thru before buying, you will probably find the topmount feels better, and can run bigger wheels, and is stronger, and feels like it has more grip ect...

 

Both the Killswitch and Dilligaf are rad boards, you won't regret buying either one.

Permalink Reply by mack daddies daddie on March 1, 2011 at 13:26
its not as strong no way .........look how much and how the drop thru is put in ................just the drop thru cut out would take some strength ....but putting the them on each end is dumb as fuck i reakon ....its just taking more strength
Permalink Reply by mack daddies daddie on March 1, 2011 at 13:30
get a top mount
Permalink Reply by Atticus antony Possingham on March 1, 2011 at 21:21
yeah i allready got a topmount but it broke and rayne probaly won't replace it cough cough "cunts' no i still like rayne and all just thought well might try drop but you seem to say it is WEEEK so ima got topmount :) LOVE KILLSWITCH  cheers guys

Premium MemberPermalink Reply by Skittles on March 2, 2011 at 7:23
how did you manage to break it?

Atticus antony Possingham said:
yeah i allready got a topmount but it broke and rayne probaly won't replace it cough cough "cunts' no i still like rayne and all just thought well might try drop but you seem to say it is WEEEK so ima got topmount :) LOVE KILLSWITCH  cheers guys
Permalink Reply by Atticus antony Possingham on March 2, 2011 at 19:30
um not broken but cracked.. it is not safe to ride tho so its good as broken.. i had some tape round the side to protect it i took it of one day and their was a crack at the back 2 on each side so it goes through the board

Premium MemberPermalink Reply by Skittles on March 2, 2011 at 20:05
Get some fibre glass on that, reinforce it.  Just because a board needs a little care doesn't mean you can't ride it!  You'll make your boards last so much longer by just fixing them as stuff starts to break.

Premium MemberPermalink Reply by Mack Daddie on March 2, 2011 at 20:28

i made tim some plates and ply inplants

looks nice i assume it improves structural quality 


Premium MemberPermalink Reply by Skittles on March 2, 2011 at 21:22
By you, you mean, your dad, with aid of us.  Aid, not to be confused with AIDS
Permalink Reply by Atticus antony Possingham on March 2, 2011 at 21:48
realy? could you maybe take some picks if you still have the board be apretiated

mack said:

i made tim some plates and ply inplants

looks nice i assume it improves structural quality 


Premium MemberPermalink Reply by Skittles on March 3, 2011 at 8:27
They are not very good, but here you go, it is supposed to make it a little stronger when topmounted by reducing the amount of sideway force applied to those little prongs.  also to stop it flexing any tiny bits, which will slowly cause cracks...
Attachments:

▶ Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service