ASRA - Australian Skateboard Racing Association

Nose Guards

Seems theres a bit of interest in these so if you want one for your board i can make one. Just need a template of the nose section (paper, wood) It is better to have the deck to get it perfect.

 

OK HERES HOW IT WORKS, You send me a paper template, Youll need a peice about 200 x 200. Take the front truck off your board and place paper, or perefably light carboard under the nose and past the truck holes. Trace it, Truck cutout and holes, and make sure its correct cause i will use that as the actuall template by glueing it to my Alum base plate (then i will weld the actuall guard to that) I will also need to know the thickness of your deck, most important..

It is better if i can get your deck or the actuall model deck to make it with, so for those in the Shire im in Caringbah, you can drop it off.

Post the template to: 

Colin Olive  

623 Port Hacking rd  

Caringbah

NSW, 2229

 

Give me a buzz and tell me its on its way 0418672600.... Price $25....ill post for free.


Views: 5062

▶ Reply to This

Replies to This Discussion

Permalink Reply by Col on June 28, 2011 at 18:27
ok buddy no probs,,,, better send me your address again just to make sure ...

Conrad said:
hey col, i checked and nothing came in, could you make me another one? thanks man

Premium MemberPermalink Reply by Conrad To on June 28, 2011 at 18:45
thanks heaps col! ^^^ absolute champ!
Permalink Reply by Col on June 30, 2011 at 23:00

   Whoever has not paid for there guards that have been sent to them, its time to cough up!...some are months overdue,

   Might have to name and shame eh....

Permalink Reply by Callum Tobutt on June 30, 2011 at 23:04

can you het your hands on a comet voodoo doll ? i have the symm so if you just got a doll you could replecate the nose twice if not ill send my template through

 

Permalink Reply by Col on July 27, 2011 at 20:58
Permalink Reply by Alexander on July 28, 2011 at 19:29
hey mate is the pic above for a praxis? if not do u make praxis guards???
Permalink Reply by Col on July 29, 2011 at 17:33

no its not,,send template...will make!

Permalink Reply by Cody Herbert on July 31, 2011 at 11:37
Will have to try and get a template for my Jefferson :)
Permalink Reply by Rhys Maiden on August 28, 2011 at 20:14

Will this guard absorb the impact or will it end up just cracking my board

Permalink Reply by Rhys Maiden on August 28, 2011 at 20:16

Ive got a Switchbade, do I still need to tell give you a template?

Permalink Reply by Joao Deloie on October 8, 2011 at 23:01

Hey Col, i really want to get a pair of noseguards! (a set for 1 board) Just wondering how much it would cost if you could chuck in some rubber between the wood and aluminum. The board is Earthwing supermodel, and i might be buying some guards of you very soon. Cheers Joao.

Permalink Reply by Joao Deloie on October 8, 2011 at 23:03

Also how would i pay you? im from Queensland.

▶ Reply to Discussion

RSS

Search

© 2026   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service