ASRA - Australian Skateboard Racing Association

Kebbek 2011 - All the details here!

Some good news to start your day...

 

Any questions / comments, ask here and I'll try to answer.


(Myriam who is back from the darkness to bring you some light...)

 

 

 

2011 boards Specs

 

KebbeK Smoothcut 37
Length: 37”
Width:10
Wheelbase: 27.75
Features: 10 plys, SC Concave, drop through, wheelwells, gaspedals

KebbeK Topmount - Pascal Jean
Length: 38”
Width: 9.8”
Wheelbase: options from 28” to 30.5”
Features: 10 plys, SC Concave, wheelwells

KebbeK Hairpin
Length: 41.625”
Width: 10.375”
Wheelbase: 32.5”
Features: 8 plys, HP Concave, drop through,

KebbeK Ben Dubreuil Swithback
Length: 41.5”
Width: 10.125”
Wheelbase: options from 31.75 to 33.25
Features: 8 plys, HP Concave, wheelwells

KebbeK Ian Comishin/J-F Boily
Length: 42.625”
Width: 10.0”
Wheelbase 34.125
Features: 10 plys, IC concave, Underflush, 17 degrees wedge nose

KebbeK Stephen Daddow Smoothcut
Length: 42.25”
Width: 9.875”
Wheelbase: 32.525
Features: 10 plys, SC Concave, underflush, wheelwells, gaspedals

KebbeK JimZ Flushcut
Length: 43.125”
Width: 9.5”
Wheelbase: 33.5
Features: 10 plys, FC Concave, flushfit for Paris baseplates

KebbeK Max Erwin
Length: 43.0”
Width: 10.125”
Wheelbase: options from 32.0 to 33.5
Features: 10 plys, FC Concave,

KebbeK Rêve
Length: 43.0”
Width: 10.313”
Wheelbase 32.0
Features: 10 plys, SC Concave, wheelwells

Views: 981

▶ Reply to This

Replies to This Discussion

Permalink Reply by Quidjam on February 22, 2011 at 9:24
That's it!
Permalink Reply by Adrian Alderson on February 22, 2011 at 9:44

Myriam,

 

e-mail sent

 

Cheers

 

Ado

Permalink Reply by Adrian Alderson on February 22, 2011 at 9:47

Just a stupid question.

 

Why is the Jim Z flushcut for Paris only? Wouldn't it have made sense to cut it for HIS trucks then just about anything elase would fit too?

Permalink Reply by matty leadfoot on February 22, 2011 at 9:49
Graphics look much better!! :)
Permalink Reply by Adrian Alderson on February 22, 2011 at 10:05
Yea, but I still can't work out why Dadbro's board has an Aztec on it (;-)>

matty leadfoot said:
Graphics look much better!! :)
Permalink Reply by Quidjam on February 22, 2011 at 10:08

Adrian : This is the only answer I could find, from AJ (AJ works at Kebbek). Not the best answer, but it explains part of it.

AJ wrote : "We had a complete JimZ+Paris+Otang , it sold very well with skateshops.
Retailers want completes, and Kebbek, Paris & Otang is like an ultimate set-up."


Premium MemberPermalink Reply by Jacko on February 22, 2011 at 10:10
non-universal cut-outs for drop-thru boards = fail
Permalink Reply by Quidjam on February 22, 2011 at 10:13

Jacko : There is always a way to modify it to fit something else!

Adrian : Not sure either, might be worth asking the artist...


Premium MemberPermalink Reply by Jacko on February 22, 2011 at 10:29
yeah but when people buy boards they dont expect to have to hack away at it to make trucks fit... i just think if they are going to do drop-thru mounting they should make it so it fits every type of truck, otherwise people will buy something else
Permalink Reply by Quidjam on February 22, 2011 at 10:48
Jacko : Yeah, I do understand what you are saying, but at the same time, I guess it wasn't that bad last year if Ian decided to do it again this year. We believe in humanity's adaptation capacity!

Premium MemberPermalink Reply by Matthys on February 23, 2011 at 16:19
whats the standing platform on the max erwin drop??????
Permalink Reply by Quidjam on February 24, 2011 at 8:00
Matthys : 10.125 x 26.75"

▶ Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service