ASRA - Australian Skateboard Racing Association

Identify degree risers and where to get them!

Have no idea where can I get those risers. Anyone help!

Views: 197

Reply to This

Replies to This Discussion

thats a 15* khiro rail set and a 5* riser pad (could be a 7.5, but doesn't look to be half as as steep an angle as the rails). Simplest way it so make one out of wood, drill mounting holes first then cut to desired angle.

 

the bushing is an 85a khiro (its got that little dimple that all khiros do).

The part touching the truck is from a Khiro Wedge Riser Kit.

I have one and they have heaps of angles!

15, 10, 7, 5, 4, 3, 2, 1 degree wedges.

The one on the bottom is just a Khiro wedged riser that you can find on the Hopkin website.

 

How long are your bolts on those risers?

Elliot O said:

The part touching the truck is from a Khiro Wedge Riser Kit.

I have one and they have heaps of angles!

15, 10, 7, 5, 4, 3, 2, 1 degree wedges.

The one on the bottom is just a Khiro wedged riser that you can find on the Hopkin website.

 

Deck riser is a 7 degree. The 5 degree doesn't have khiro written on it in the soft. Not sure why anybody would want a bennett wedged 22 degrees, that angle on a bennett would almost lead to no turn due to no leverage.

 

I can get the Khiro riser kit at the HopShop I just don't because nobody buys it. You can already get 5,7,10,12,14 degrees from normal available risers

Thats a bizzare setup, looks like the axels forward of the pivot.

I think my bolts are 2", not absolutely sure but they have to be pretty big.

I don't use that exact combo but yeah they need to be longer than 1.5" that's for sure.

Just send Ado at Cre8Ive Sk8 a message and he'll hook you up with the gear you need. He really helped me get my pump on.

Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service