ASRA - Australian Skateboard Racing Association


Premium Member

Ghetto Mods

Chopped boards, dodgy kicktails, truck mods, rain wheels, ect...

Show us your dirtiest, cheapest, jankiest setup mods or any other sick ideas you came up with at a safety meeting.

Ill get the ball rolling with this, wheel well sander, made completely from parts of your existing board.

You'll need; a drill, a kingpin and nut, a bushing and two washers. Ideally a 22mm washer with an 8mm bore, but they are hard to come by, so I fond cupped cone washers work well.

ASSEMBLE like the picture, then either stick on some sandpaper or a sheet of grip and go nuts.

Obviously I am aware that a drum sander or router can cut your wells, but why go buy a 300 dollar power tool when you can make a tool for free.

Post all your stuff, no haters, no judgement, if you reckon its a good idea, post it.

Tags: chop, chopped, dirty, downhill, ghetto, jank, mods, sick

Views: 211

Attachments:

▶ Reply to This

Replies to This Discussion


Premium MemberPermalink Reply by Lachlan Cashman on July 28, 2012 at 12:01


Premium MemberPermalink Reply by The Dave on July 28, 2012 at 15:45

Premium MemberPermalink Reply by Dave M on July 28, 2012 at 17:03

Does replacing a snapped Butt Board at Newtons in record time using parts from bunnings count?


Premium MemberPermalink Reply by Lachlan Cashman on July 28, 2012 at 17:11

Great minds...

Permalink Reply by James on July 28, 2012 at 19:59

▶ Reply to Discussion

RSS

Search

© 2025   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service