FS: Boardmaking press

Its big's. Heavy. Solid steel construction.

Comes mounted on wheels so you can push it round the workshop.

Comes with 2x new "Weber Hydraulik" German made hydraulic jacks.

Concave form will make a 9" wide deck.

Simple flatcave form can press up to 10" wide.

4" wide steel channel to act as spine under jack pressure.

M20 high tensile steel side bars Adjustable opening height with nuts. 40mm RHS steel cross struts.

The press capacity can do any deck up to 15" wide by 55" long.

You just need to make whatever forms to suit the deck you wanna make.

Various materials included to get you started including fibreglass cloth and various ply sheets used for pressing inc foamcore, fibreglass cloth, formica for bling bottom layer.

Drill press included.

$300 solid price. Jacks alone are worth that much each!

This is a rock bottom price and press has gotta go.

Prefer someone local so I can still drop by once a blue moon to press out a blank.

Everything must go together. No splitting up and buying individual items.

Contact either me or Joe to arrange pickup from Sutho Shire.

Replies to This Discussion

Permalink Reply by Aych on February 18, 2011 at 23:11

Did I see mention of "Daddow longboards" somewhere, this could maybe be a good marriage

Permalink Reply by Steven Rose on February 18, 2011 at 23:28

dang, if only this was before i decided iwas moving to W.A that thing would be a pain in the ass to haul across the country!

Premium MemberPermalink Reply by Steve on February 19, 2011 at 6:06

Fitz. very interested. In fact i'm calling 1st dibs. I was just about to build my own but this may save me a heap of time and coin!

Whats the capacity of the jacks? Are they running seperatly or through a manifold?Throw up some pics can ya fitz

Premium MemberPermalink Reply by Adam on February 19, 2011 at 8:17

I just built one. Grab it steve. In fact jump on, hold him down and make sure you get it. Hmmmm I wish I could have the jacks.

Premium MemberPermalink Reply by Fitz on February 19, 2011 at 10:46

Jacks are bottle style. No manifold. 2tn each.

Separate although you might be able to modify them to run parallel by hard plumbing.

I'm going over to Joes later this arvo to get some pictures. Thats where its stored.

FS: Boardmaking press

Replies to This Discussion

Search