ASRA - Australian Skateboard Racing Association

Tags: Comet, FSM

Views: 372

Replies are closed for this discussion.

Replies to This Discussion

Anyone knows how can i solve this? the cracks are seen at all parts of the screws which attach the trunks!

I'd assume just inject some epoxy into the cracks, clamp it and hope for the best.
This is why you should use shock pads and washers

that's why you dont get a drop thru board made out recycled woodchips...

it will be fine, keep calm and just skate the shit out of it. Or alternatively you could send an email to comet.

@Luka alright. i heard that we can put washers at the screws too?

@phillip well lets see how long will it last then.

@caspian alright. i heard that comet wont really do anything about it

@tuure: will washers help?

washers will help spread the load. comet used to replace boards for people but they have upgraded their construction. 

just dont worry about it. ride it hard and fast. then do early grabs 

@phillip thanks man i will get some washers. the flat washers are better than the cup right? and i can just go and grab it at any hardware store? doesnt have to be some skate shop right

are washers adequate? or is this safer?

tim said:

 

 

Rogers Bros dropthrough plates is what you need or make them yourself.

or one of these from the HopShop. 16 bucks and its at your door

those would spread the load better than washers

damn i just bought washers.. oh well nvm shall buy the risers

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service