avenger
Just wondering what set ups you skaters with avengers are running?Ive got some grizzlies for it 52deg and 40deg but was wondering what diameter wheels and risers people are running.Because if i flip the hangers the back wheels will get wheel bite,just so i can order the right hardware when i order some wheels(as all the skate shops in brissie look at you funny if you ask for bolts over 1 inch long!)
CheersTim
CheersTim
Views: 26
Replies to This Discussion
-
Premium MemberPermalink Reply by Jacko on -
i'd be thinking you have your back truck way too loose if your getting wheel bite... that deck is designed to allow loose (and low) trucks without wheel bite... ive got Kookies on and they are lower than grizzleys and i dont get wheel bite... you might wanna put some harder bushings in it or just tighten it up a bit... dont need risers on the avenger dude
-
Premium MemberPermalink Reply by Jacko on -
not a chance dude... unless your rockin 80+mm wheels i dont think your gonna get wheel bite... but i dont think 80+mm wheels are very suited for top-mounts anyway
-
Permalink Reply by Fletch on
-
Kristian, I think you need to run your mounting bolt the other way, especially if they are countersunk heads, they could pull through the deck.
© 2024 Created by Bugs.
Powered by
