ASRA - Australian Skateboard Racing Association

wolfshark setup

hey i just got a wolfshark deck today and i put my old boards vault trucks on it but what would be better trucks to get i heard that gunmetal trucks would but you guys tell me what you run on yourdecks i want to do dh and fast freeride

Tags: wolfshark

Views: 693

▶ Reply to This

Replies to This Discussion

Permalink Reply by james beton on December 30, 2011 at 20:04

yea i know its mainly personal opinion but the wolfshark is only my second board so i want to no if there are any special trates of each trucks like thinggs they do better than other 

Permalink Reply by Cents on December 30, 2011 at 20:47

Paris

Buck

Randal*

Bear*

Gunmetal v2*, Calibre

Levels of restrictiveness increasing downwards. The trucks with the * next to them means they don't shorten your wheel base. 

Permalink Reply by james beton on December 30, 2011 at 20:55

what about the gunmetal magnum



Cents said:

Paris

Buck

Randal*

Bear*

Gunmetal v2*, Calibre

Levels of restrictiveness increasing downwards. The trucks with the * next to them means they don't shorten your wheel base. 

Permalink Reply by Cents on December 30, 2011 at 21:01

Same thing - just make sure you buy v2. 

Permalink Reply by james beton on December 30, 2011 at 21:16

ah ok

thanks

Permalink Reply by james beton on December 30, 2011 at 21:28

whats a good shop in sydney to get the magnum v2 hop dont stokem on their website



Cents said:

Same thing - just make sure you buy v2. 

Permalink Reply by Cents on December 30, 2011 at 21:34

If they're not available you can just get Calibres.

Permalink Reply by james beton on December 30, 2011 at 22:15

how good are the 
Caliber Fifty 10" White Gold Cents said:

If they're not available you can just get Calibres.

Permalink Reply by Cents on December 30, 2011 at 22:19

All I can say is that I have skated all those trucks, liked all of them, run sabres. 

*slightly false - I've only had brief experiences on the buck and gunmetals. Though there wasn't anything I didn't like- just some I liked more.


Premium MemberPermalink Reply by The Dave on December 31, 2011 at 7:59

I haven't run my Sabres on a topmount YET, but....given the gangster lean you get out of them I'm thinking wheelbite is more likely to be a problem.

 

James, you really can't go wrong with calibers. They will do everything you need them to do and more. Just grab a set from Hopkin and get their advice on a good bushing setup.


Cents said:

All I can say is that I have skated all those trucks, liked all of them, run sabres. 

*slightly false - I've only had brief experiences on the buck and gunmetals. Though there wasn't anything I didn't like- just some I liked more.

Permalink Reply by Cents on December 31, 2011 at 8:50

I run sabres on a wolf shark with a 1/8" riser pad. I weigh 60kg. 86a cone/ 88a barrel sabre bushings. I don't get wheel bite but only just barely. 

Permalink Reply by james beton on December 31, 2011 at 13:13

are they reverse kingpin?

The Dave said:

I haven't run my Sabres on a topmount YET, but....given the gangster lean you get out of them I'm thinking wheelbite is more likely to be a problem.

 

James, you really can't go wrong with calibers. They will do everything you need them to do and more. Just grab a set from Hopkin and get their advice on a good bushing setup.


Cents said:

All I can say is that I have skated all those trucks, liked all of them, run sabres. 

*slightly false - I've only had brief experiences on the buck and gunmetals. Though there wasn't anything I didn't like- just some I liked more.

▶ Reply to Discussion

RSS

Search

© 2024   Created by Bugs.   Powered by

Badges  |  Report an Issue  |  Terms of Service