Painting a black deck
of the board using posca pens. What is the process to do this without letting the ink from the pens bleed on to the wood? I also want to have a white base coat
Views: 119
Replies to This Discussion
-
Premium MemberPermalink Reply by Jacko on -
step one: paint it white....
now you have your white base coat.
step two: use Posca pens to draw in your own graphic
holy fuck that took me hours to figure out. fully had to ask mum and dad for help on how to use my brain for this one!
hope that helps!
-
Premium MemberPermalink Reply by The Dave on -
DON'T FORGET TO BUY A CAN OF WHIT SPRAYPAINT FIRST.
YOU CAN USE THAT TO PAINT YOUR DECK.
THIS IS VERY IMPORTANT.
PM ME IF YOU REQUIRE MORE DETAILED INSTRUCTIONS ON HOW TO DO THIS.
Jacko, imagine having to deal with this every day.....
-
Permalink Reply by choyzaa on
-
im sorry that i dont have much experience in this category but i at least thought this community would be helping and not take the mickey. thanks for your answers
-
Premium MemberPermalink Reply by The Dave on -
A much better option would have been to ask at a hardware store, not on a downhill racing forum.
You've also picked a bad time - there has been a flood of stupid questions from groms who can't be bothered doing any research in the right places first. Most people are over it.
-
Permalink Reply by Alexander on
-
Ay fuckin "which wheel is best", "wat board should i buy", "wat trucks are good (then you tell aera's and they crack the shits coz there so exspensive) learn to investigate and experiment thats the only way you'll actually find something that works.
The Dave said:A much better option would have been to ask at a hardware store, not on a downhill racing forum.
You've also picked a bad time - there has been a flood of stupid questions from groms who can't be bothered doing any research in the right places first. Most people are over it.
-
Premium MemberPermalink Reply by m0juu on -
ask maddog which bearings are best for sliding
© 2025 Created by Bugs.
Powered by
