If im Goofy where do I put my toe stop to prevent too much movement of my foot during my toe- side predrifts?

Replies to This Discussion

Premium MemberPermalink Reply by Brady Lane on July 16, 2011 at 11:50

http://www.skateboardracing.org.au/photo/new-footstop

• ▶ Reply

Permalink Reply by Callum Tobutt on July 16, 2011 at 11:54

only problem with that is im doing it with a bushing and i cant find a bolt to fit

• ▶ Reply

Permalink Reply by Merrick Wildash on July 16, 2011 at 11:56

Drill a hole bro. I know it sounds epic to just go and drill extra holes in your board, but its the best way to get a comfy toe stop. 

 

For me I figure where I want my foot to be, Put a dot. then drill 7-12mm in front of that point, just to give room for the bushing, so my foot isnt pushed back. 

 

Need more advice inbox me. I can send you some photos explaining it. 

 

Merrick.

Callum Tobutt said:

only problem with that is im doing it with a bushing and i cant find a bolt to fit

• ▶ Reply

Permalink Reply by Callum Tobutt on July 16, 2011 at 11:58

yeah merrick i have you on facebook if you could explain abit more that would be great ahahah

• ▶ Reply

Premium MemberPermalink Reply by Tom Radinski on July 16, 2011 at 12:00

same place you would if you weren't goofy? wherever feels comfortable.

• ▶ Reply

Permalink Reply by Callum Tobutt on July 16, 2011 at 12:01

yeah i ment which bolt but since i was still half asleep i wrote that .... aahha

 

• ▶ Reply

Permalink Reply by Callum Tobutt on July 16, 2011 at 12:19

all done thanks merrick for helping me out !

• ▶ Reply

▶ Reply to Discussion