toesides always stuff my grip

Premium Member Comment by Alex on January 19, 2010 at 17:47

Same Benbro. Got a bald patch on my deck too... as well as the melted toeside marks.

Cant wait for the 'Early grit' to come out. Full on shoe destroyer that stuff...

Comment by Ryan 'RY RY' Peterson on January 19, 2010 at 19:28

i think i spot a coned wheel at top of the screen ^^

Comment by Brad B on January 19, 2010 at 19:35

just run a couple of short screws through the underside of your deck ,)

Premium Member Comment by Benbro on January 19, 2010 at 19:36

yeh those wheels finally got retired this arvo,they were paper thin and crumbling on the inside edges,mega flatspots,
crazy vibrations......this grip only last a day,seems really soft,..vicious and a few others last a bit better...be good to try this early tape you speak of alex......sounds gnar,..

Premium Member Comment by Benbro on January 19, 2010 at 19:43

dont understand brad.....what do they do?

Comment by Brad B on January 19, 2010 at 20:43

little metal spikes, for permanent grip ,)

Comment by Ash on January 20, 2010 at 7:49

out of all the stuff ive tried, edger by far is the most wear resistant grip. vicious i had was absolutely crap, worn through in a day, and pretty much every "regular" skate grip is the same (slight exception for Jessup, its not too bad)

Premium Member Comment by Jacko on January 20, 2010 at 9:30

next time u re-grip you should wrap it around the rail of the board so it doesnt 'pull' back into the middle, gives it extra strength

Add a Comment