Board building help...Press,Wood,Glue,CF or FG

Hello,

I am making my first board ever. I am thinking of using wood that is 1.5mm - 3mm thick and is Hoop pine ply, I am wondering how many ply I should use to make a fully solid deck for DH and freeriding which is 35-37" long and 10" wide. I am thinking of putting a layer of Fibreglassing or Carbon fibre in the middle of the board to make it solid. I am also wondering what glue to use...most people have told me to use titebond 3. And i am also wondering if I should make 2 seperate plys of wood and put in press the after they have both dried and put glass or CF in the middle. Also how am i meant to stick the 2 plys of wood together with the glass or CF in the middle.

1 more thing, how and what are the best way to put graphics on the bottom or the board?

I dont know how and what press to use. a normal wood one or vacuum press. I dont know how the vacuum press works. I am making a speedboard.

Also what fibreglass should i use and what resin or epoxy should i use?Or CF

Any help is greatly appreciated.

Also any tips and step by step instructions is also very appreciated.

Sorry for alll the questions and thanks for your help.