Want to build your own board, cheap press for sale to good home!
hey guys,
Anyone in the Canberra/ACT area, ever fancied building your own board?
I make my own decks, however I'm moving away from ACT and therefore have a press which is no longer needed here.
It's a typical mdf board/rib/threaded-rod press set up, currently ribs are set for a standard pintail board. (see attached pics)
Moving away in about 10 days time (from this post).
$30 all in (o.n.o.) plus i'll throw in a sheet of 4mm hoop pine (1200x600) which would be enough to make a little cruiser or slalom deck.
I'll even throw in a jigsaw and some clamps to help with cutting and making your board.
This needs to shift before i go, and i'd hate to see it go to the dump when i know it could start someone out on making their own decks.
I've no car, so it'll need to be pick-up only i'm afraid. I'm based in O'Connor area.
Give me a call if you'd like it Adrian 0414328238
don't miss out on kitting yourself up guys, and building your own is so much better :))
cheers,
Views: 109
Replies to This Discussion
-
Permalink Reply by jason treloar on
-
sweeet man, hopefully you can fit it in.
-
-
Permalink Reply by ado on
-
jason.....sorry dude, been pipped at the post
henry has appeared at the last minute and is back in canberra to take it in the morning before i leave so i'm afraid he gets the prize...sorry man.
but get yourself out to bunnings, get some mdf, some threaded rods, a jigsaw and some sw blocks and knock yourself up a press. Costs about $120ish to knock it up but you'll get to press your own...plus the choice of timbers to use is much better down in melbourne due to the shipping/boat building industry based there!
jason treloar said:sweeet man, hopefully you can fit it in. -
- ‹ Previous
- 1
- 2
- 3
- Next ›
© 2024 Created by Bugs.
Powered by
