Pressure cracks, how to fix??

Replies to This Discussion

Permalink Reply by Jack on March 4, 2011 at 20:51

search function?

• ▶ Reply

Permalink Reply by Aaron London on March 4, 2011 at 20:57

yeah, i tried that

• ▶ Reply

Premium MemberPermalink Reply by Skittles on March 4, 2011 at 21:00

ask someone in the board builders threads, they are sure to have a fix for you

• ▶ Reply

Permalink Reply by Jezza on March 4, 2011 at 21:24

In the wood or that fibreglassy/ graphic layer?

Either way work as much Epoxy (5 minute Areldite from Bunnings is fine) into the affected area as you can. A syringe from a pet shop works well, or, (if you've got a heat gun or a steam iron) heat up the area, apply glue, then cool rapidy (it sucks the glue into all the voids). After you've got the glue in apply pressure to it as best as possible, and the excess glue should come out. Leave it like that till the epoxy's cured. Same principle as fixing a delam

 

• ▶ Reply

Permalink Reply by Aaron London on March 4, 2011 at 21:26

ohh thankyou so much,  defiantely going to be doing this

• ▶ Reply

▶ Reply to Discussion