opinions on new landyachtz time machine?

Replies to This Discussion

Permalink Reply by Max Heaton on June 3, 2011 at 17:26

a friend has a time machine and runs 50 plates. it horrible and un responsive, and ive given him several type of bushings. run with like 42 plates or something so you get some life out of the board.

Premium MemberPermalink Reply by Nate C on June 3, 2011 at 19:44

Seriously people , feck off with all the whingeing every time someone asks a question. That is the point of a forum. If you dont want to read it , just dont open it.

 

Permalink Reply by jarrod styles on June 4, 2011 at 12:34

i looked it up on silverfish and its not there mate, besides i would rather talk to aussie.

Dermott Pascoe said:

you know you could just look this up on silverfish instead of clogging these forums

Permalink Reply by Gareth Prevost on June 13, 2011 at 10:06

ive had my time machine for about 3 three weeks now. im riding some paris 180s and some 86a stims. the wedges seem to increase the 'turn to lean' ratio which is pretty cool. i ride my trucks so that the kingpin bolt is flush with the actual kingpin, it increase the turn.

 

Permalink Reply by James Entwisle on June 14, 2011 at 19:11

You are the one with the board, your the one that needs to decide if the setup is right for you or not :l

Premium MemberPermalink Reply by James on June 14, 2011 at 19:42

^Oath, not much good everyone else telling you what your board is like, espically if you already bought it

Permalink Reply by James Entwisle on June 14, 2011 at 20:54

^ Oath + 10

Permalink Reply by speedy canuck on June 15, 2011 at 6:07

its almost like they brought back the urban assult and made it worse.

Permalink Reply by storm1N on June 16, 2011 at 18:16

I don't think thats possible speedy canuck.... haha

Permalink Reply by jarrod styles on June 16, 2011 at 22:22

haha, na just wanted to know if i should have other trucks on it because the way landyachtz sell it is with bear 840 trucks but i couldnt get them so i just got paris's. Also im having trouble sliding, should the stimulus slide well?

Premium MemberPermalink Reply by tommy on June 16, 2011 at 23:31

any wheel can  slide   (to a degree )

but al o'tang wheels will slide it is all in the rider not the set up nor wheels  but i do agree with  maximus you would have a better run with that  board if you put a 40 base plate  and 100 % agree with speedy canuck . much worse

Permalink Reply by jarrod styles on June 16, 2011 at 23:50

i just wana do stand up switchs?