Nose Guards

Seems theres a bit of interest in these so if you want one for your board i can make one. Just need a template of the nose section (paper, wood) It is better to have the deck to get it perfect.

OK HERES HOW IT WORKS, You send me a paper template, Youll need a peice about 200 x 200. Take the front truck off your board and place paper, or perefably light carboard under the nose and past the truck holes. Trace it, Truck cutout and holes, and make sure its correct cause i will use that as the actuall template by glueing it to my Alum base plate (then i will weld the actuall guard to that) I will also need to know the thickness of your deck, most important..

It is better if i can get your deck or the actuall model deck to make it with, so for those in the Shire im in Caringbah, you can drop it off.

Post the template to:

Colin Olive

623 Port Hacking rd

Caringbah

NSW, 2229

Give me a buzz and tell me its on its way 0418672600.... Price $25....ill post for free.

▶ Reply to This

Replies to This Discussion

Permalink Reply by Col on April 29, 2011 at 8:30

got a template so can make them when you want...

▶ Reply

Permalink Reply by Cents on April 29, 2011 at 15:09

Hey Col do you have a templte for an earthwing belly racer? Mine just came in today

▶ Reply

Permalink Reply by Jordannn on May 1, 2011 at 22:00

Any Topmount rayne killswitches?

Nose and Tail?

▶ Reply

Permalink Reply by Bozac on May 1, 2011 at 22:34

hey col when you say laser cut ones are in the works are they still alum or are they going to be a stronger steel?

▶ Reply

Permalink Reply by Col on May 2, 2011 at 21:05

I can make them out of steel but they would have 2 be powdercoated so they dont rust. Canned the lazer cutting as were setting up a plazma at work but is a bit in the future yet.

Bozac said:

hey col when you say laser cut ones are in the works are they still alum or are they going to be a stronger steel?

▶ Reply

Permalink Reply by Cents on May 2, 2011 at 21:08

Hey Col my earthwing has 2 sets of truck holes will your new slotted design account for both?

▶ Reply

Permalink Reply by Cents on May 3, 2011 at 13:15

Hey Col just to check before I send them. You said you wanted 200 by 200 was that a necessity? Does it matter that the cardboard edges are shonky? (belly racer btw)

▶ Reply

Permalink Reply by Col on May 3, 2011 at 18:03

There fine mate ,,good job

Cents said:

Hey Col just to check before I send them. You said you wanted 200 by 200 was that a necessity? Does it matter that the cardboard edges are shonky? (belly racer btw)