Griptape Help

Replies to This Discussion

Permalink Reply by Robbo on December 4, 2010 at 21:14

Belt sander

• ▶ Reply

Permalink Reply by leighgriffiths on December 4, 2010 at 21:23

that or sandpaper (piece of griptape)

• ▶ Reply

Premium MemberPermalink Reply by Tom Radinski on December 4, 2010 at 21:23

get the bulk off with a bit of sandpaper or a butter knife then just grip over it

• ▶ Reply

Permalink Reply by Joshua Banner on December 5, 2010 at 15:07

thanks dudes... what kinda sand paper like coarrse???

• ▶ Reply

Permalink Reply by Nick Drummond on December 5, 2010 at 15:25

not extremely coarse. dont sand it excessively so you dont start sanding into the fibreglass. do it just enough that the surface isnt rough but still a slight bit bumpy

• ▶ Reply

Permalink Reply by Joshua Banner on December 5, 2010 at 15:45

ohh... might need to go buy some good quality crap and not some 2 dollar shop crap then :) thanks brosephs :)

• ▶ Reply

▶ Reply to Discussion