Cre8ive Sk8
Replies to This Discussion
-
Permalink Reply by Jezza on
-
or you could do it ghetto style
get some WD-40, spray it on the kingpins, then leave it for a while. Come back a few minutes later, hit em out with a mallet, wash the plates in metho (to get rid of the surficant in the spray lube). Get some regular old 2.5" kingpins, slip em in and trace with a pencil where they come out the other side. Take them out and coat the heads down to that line in 5min epoxy, slip back in and leave for half an hour. Fill the rest of the hole up with epoxy and your done, let it all cure for 24 hours then skate.
you can also redrill indy plates if you want, theres enough meat on the plate to allow you to do it.
Grab the indy's off Ado, and just do a little modding.
Jack Nolan said:by hybrid he refers to what Mile High Skates in america (possibly canada) makes, they sell a truck which is typically an Indy 215 hangar on a core baseplate, this is because the core baseplate has a longer kingpin and more truck mounting options as well as a better pivot cup. He loads them up with sabre bushings and sells them specifically for longboarders. Most people ride them on something like a killswitch or a FSM, Earthwing supermodel etc. they are a big hit because lots of longboarders like a conventional truck style and these can be effectively used up to high speeds due to the bushings and kingpin. apparently they are great for freeriding.
The killswitch in this video is set up with them and you can see them on Mile High Skates aswell: http://www.youtube.com/watch?v=9bCe7kpJeWA haha sorry for going on a bit :P
Adrian Alderson said:$225 shipped. Don't have any core bases. I have Indy trucks, not sure what you mean by hybrid?
Cheers Ado Tash said:Hey Ado,
how much for a roger bros DH36?
and do you stock core baseplates or a hybrid indy style truck? thanks
-
Permalink Reply by Adrian Alderson on
-
Jack,
only have the SHR Venoms, so no purples. Can do them in SHR for $10
Jack Nolan said:oh also, how much would it cost for:
2x Purple 87a venom barrels (just enough for one truck)
and 4 flat washers for double barrels.
thanks :)
-
Premium MemberPermalink Reply by Jack on -
ok that sounds good too,
if so, could i please get
2x Purple 87a venom barrels shr
2x yellow 85a venom barrels shr
the 4 washers
and two 2.75 inch kingpins so i can fit double barrels on randals :)
oh just remembered you said no purples in shr. can i get the corresponding duro then. and if they arent the same, go up isntead of down, because apparently SHR's are a tiny but softer :)
so it would be 86a blue and 88a light green?
haha ill let you work the technical stuff out
how do i go about payment?
Adrian Alderson said:Jack,
only have the SHR Venoms, so no purples. Can do them in SHR for $10 Jack Nolan said:oh also, how much would it cost for:
2x Purple 87a venom barrels (just enough for one truck)
and 4 flat washers for double barrels. thanks :)
-
-
Drop me an e-mail on adrian at cre8ivesk8 dot com and I'll send you my details.
Cheers
Ado
Jack Nolan said:ok that sounds good too,
if so, could i please get
2x Purple 87a venom barrels shr
2x yellow 85a venom barrels shr
the 4 washers
and two 2.75 inch kingpins so i can fit double barrels on randals :)
oh just remembered you said no purples in shr. can i get the corresponding duro then. and if they arent the same, go up isntead of down, because apparently SHR's are a tiny but softer :)
so it would be 86a blue and 88a light green?
haha ill let you work the technical stuff out
how do i go about payment?
Adrian Alderson said:Jack,
only have the SHR Venoms, so no purples. Can do them in SHR for $10 Jack Nolan said:oh also, how much would it cost for:
2x Purple 87a venom barrels (just enough for one truck)
and 4 flat washers for double barrels. thanks :)
-
Premium MemberPermalink Reply by David Evans on -
hey mate, you still selling 08 bear smokey's for $250?
-
-
Yep!!!!!! Still got a couple of sets
David Evans said:hey mate, you still selling 08 bear smokey's for $250?
-
Permalink Reply by harry hoffmann on
-
hey ado, stoked with the drop killlswitch,
how much for a set of Abec11 Freerides 77mm, in 84a duro, and also
do u have any darkspeed pucks??
cheers
-
Premium MemberPermalink Reply by Ted Dwyer on -
hey ado,
just wondering if you have any avengers in stock? its etiher that or a lbl sea cow but you dont stock lbl do you..
cheers
-
-
Freerides are $90 a set, and in stock. Sorry but no Darkspeed Pucks
harry hoffmann said:hey ado, stoked with the drop killlswitch,
how much for a set of Abec11 Freerides 77mm, in 84a duro, and also
do u have any darkspeed pucks??
cheers
-
-
Do have 1 Avenger left, and no, I don't do LbL, sorry
Ted Dwyer said:hey ado,
just wondering if you have any avengers in stock? its etiher that or a lbl sea cow but you dont stock lbl do you..
cheers
-
Premium MemberPermalink Reply by Ted Dwyer on -
thats cool noone does lbl in aus :( lol
how much for the avenger gripped and shipped??
hoping to buy in the next few weeks, just hoping noone takes it before then :) but im not grom stalling, if someone else grabs it thats no problem :)
Adrian Alderson said:Do have 1 Avenger left, and no, I don't do LbL, sorry
Ted Dwyer said:hey ado,
just wondering if you have any avengers in stock? its etiher that or a lbl sea cow but you dont stock lbl do you..
cheers
-
-
$250 gripped and shipped
Ted Dwyer said:thats cool noone does lbl in aus :( lol
how much for the avenger gripped and shipped??
hoping to buy in the next few weeks, just hoping noone takes it before then :) but im not grom stalling, if someone else grabs it thats no problem :)
Adrian Alderson said:Do have 1 Avenger left, and no, I don't do LbL, sorry
Ted Dwyer said:hey ado,
just wondering if you have any avengers in stock? its etiher that or a lbl sea cow but you dont stock lbl do you..
cheers
© 2024 Created by Bugs.
Powered by
